48K Spectrum and VGA monitors...

A place to discuss the ZX80's and ZX81's younger brother - the Sinclair ZX Spectrum
quigbert
Posts: 1
Joined: Sun Jan 18, 2015 2:39 pm

48K Spectrum and VGA monitors...

Post by quigbert »

Hello everyone. My name is Steve, I live in London and this is my first post on the SZXW site. :)
Anyone on facebook might like to be drawn to this page as well if they aren't already... https://www.facebook.com/profile.php?id ... 50&fref=ts
I recently won a 48K Spectrum on ebay (with a LO Profile keyboard :) ) Its nice to have a spectrum again after all these years (I'm 39 by the way..)
I would like to know if it is possible to use a VGA monitor with the 48 in any way?
Has anyone had any success with this?
Does the GBS8200 work?
Any help appreciated, Thanks.
Steve (quigbert)
User avatar
stefano
Posts: 542
Joined: Tue Dec 11, 2012 9:24 am
Contact:

Re: 48K Spectrum and VGA monitors...

Post by stefano »

As far as I know it is not a starightforward thing.
Getting standard RGB (SCART) signal is tricky already; to get a valid VGA output you also need to adapt the scan frequency and generate few more signals, they seem to be doing it here:

http://velesoft.speccy.cz/zx/zx-vga/
User avatar
RetroTechie
Posts: 379
Joined: Tue Nov 01, 2011 12:16 am
Location: Hengelo, NL
Contact:

Re: 48K Spectrum and VGA monitors...

Post by RetroTechie »

Well you'd need:

* Some circuit to take composite sync (in the Y signal?) from the ULA, and pull separate horizontal + vertical syncs from it. Such circuits exist (LM1881 for example), but how to wire those into a Spectrum 48K...??
* Some circuit to convert color signals from the ULA (= some flavor of YUV) into RGB.
* VGA monitor that can handle ~15 kHz horizontal sync. Such monitors exist, but which ones? I've never seen a good list.
* Wiring up all of the above.

In other words: lots of work including some circuit design, with uncertain outcome. Instead, I'd choose between 1 of 2 routes:

1) Find a Spectrum 128K or later model, and use with a monitor/TV that has a SCART input. Or:
2) Use any monitor/TV that includes a composite video input (apparently even some VGA monitors have this!). Such a monitor would surely have to support the horizontal sync frequencies that are common for devices with composite video output.

Hint: in case you lack a 128K or later model: these tend to be expensive, and chances are you can buy a looooottt of monitor for the same money. ;)
gozzo
Posts: 452
Joined: Fri Jul 08, 2011 8:52 pm

Re: 48K Spectrum and VGA monitors...

Post by gozzo »

there is supposed to be a 'composite video' connection on the expansion slot of a standard 48k machine.....as for VGA monitors handling 15.625khz, most likely any suitable ones would be LCD types as the line output stages in CRT types are 'tuned' to run at a specific frequency (or narrow range), unless complicated circuitry is used.. trying to persuade a normal VGA one (31khz - ish) to run at 15khz or so would probably result in line output transistor failure quite quickly..converting YUV to RGB(which could then feed a 15khz capable monitor?!) ... there are fairly simple circuits around on the net that do this...can't remember where though at the moment!
gozzo
Posts: 452
Joined: Fri Jul 08, 2011 8:52 pm

Re: 48K Spectrum and VGA monitors...

Post by gozzo »

and there ARE composite to VGA converters on ebay at various prices, some dirt cheap, bought direct from china...
Kiwisek
Posts: 39
Joined: Sun Mar 13, 2011 6:09 pm
Contact:

Re: 48K Spectrum and VGA monitors...

Post by Kiwisek »

Use this http://www.8bit.8u.cz/Files/Faudraj/ or Velesoft's slightly adopted version of this design. It works great.
User avatar
-B-
Posts: 26
Joined: Wed Jul 16, 2014 12:12 pm

Re: 48K Spectrum and VGA monitors...

Post by -B- »

I have done the composite mod on mine then put it through a SCART to HDMI converter (£20 eBay) then through a HDMI to VGA converter (£5 eBay)

The composite mod consists of removing the 5v power to the RF module, desoldering the resistor connected to the back of the RCA connector and feeding the input to the RF modulator straight to the centre pin of the RCA connector.
image.jpeg
Handles composite, RGB and Y/C inputs.
(1.33 MiB) Downloaded 5174 times
image.jpeg
No lag detected
(2.24 MiB) Downloaded 5174 times
-B-
pniklas
Posts: 1
Joined: Sun Jan 01, 2017 10:51 pm
Contact:

Re: 48K Spectrum and VGA monitors...

Post by pniklas »

Hi,

Could you tell me in which pin of the Scart have you connected the composite video?

Thanks.
User avatar
-B-
Posts: 26
Joined: Wed Jul 16, 2014 12:12 pm

Re: 48K Spectrum and VGA monitors...

Post by -B- »

I used an A/V to SCART connector in the photo above but pin 20 is composite in and pin 17 is ground.

https://en.m.wikipedia.org/wiki/SCART

-B-
mattzx48
Posts: 1
Joined: Tue Nov 13, 2018 11:09 am

Re: 48K Spectrum and VGA monitors...

Post by mattzx48 »

I have a problem with my GBS-8220 https://images.search.yahoo.com/search/ ... tion=click with the ZX Spectrum 48k because in requires the direct Y signal while my ZX Spectrum generates inverted Y from the edge connector. So it requires to build the inverter but I managed to do it the other way even if I am still fighting with small noise the so called MTV box link here: https://ae01.alicdn.com/kf/HTB1j4YNQFXX ... ceiver.jpg It is an analog TV tuner with VGA output and also the composite input. My goal was to put the original RF version on VGA but of course you can try to do the same with Composite altered version of it. I am getting the composite signal from lower connections 14(0V) and (15) composite output https://faqwiki.zxnet.co.uk/wiki/ZX_Spe ... eo_Outputs and connect it to AV mode of the MTV box. The picture is not perfect but acceptable (I am not sure if it is because I used to cheap and thin composite cables) and on turn on it does not lock well on PAL - for example with the BORDER command it gives the colors striped like ZX would load something and it gives the same in normal UHF mode which I can fix only using the other Porsche Blaupunkt car TV tuner in cascade to composite video (I have to switch back and forth to TV mode to lock well) but it works and is a matter of tuning to make it perfect probably mostly by improving the shielding of the VIDEO cables.
Post Reply