ZX Spectrum Next
Re: ZX Spectrum Next
Yes - indeed.
You could order them via SMR including all screw parts or keyboard (depending on long or short version of case):
https://www.sellmyretro.com/search?keyw ... &listSort=
Shipment fee international is EUR 3.70 (not 18 EUR as per formulor direct order).
And yes - I did the design. It is more simple, nothing spectacular. But will protect the NEXT inside.
You could order them via SMR including all screw parts or keyboard (depending on long or short version of case):
https://www.sellmyretro.com/search?keyw ... &listSort=
Shipment fee international is EUR 3.70 (not 18 EUR as per formulor direct order).
And yes - I did the design. It is more simple, nothing spectacular. But will protect the NEXT inside.
-
- Posts: 9
- Joined: Wed Jan 17, 2018 12:11 pm
Re: ZX Spectrum Next
hi.
but ordering from formulator, we also get the screws and the other stuff or only the acrylic?
Thnaks
but ordering from formulator, we also get the screws and the other stuff or only the acrylic?
Thnaks
Re: ZX Spectrum Next
Formulor delivers only the plane acrylic parts, it is one big plate cutted into the parts. Additionally you have to countersink the outer holes yourself manually - this can not be done with the laser cutter. But is done in the parts delivered from the sellmyretro cases.
Looks like this
or this (2 cases on one plate due to fixed plate sizes)
Looks like this
or this (2 cases on one plate due to fixed plate sizes)
-
- Posts: 9
- Joined: Wed Jan 17, 2018 12:11 pm
Re: ZX Spectrum Next
ok...
i'll order later from SMR
Bruno
i'll order later from SMR
Bruno
Re: ZX Spectrum Next
By the way - through rearrangement I got the complete case with keyboard now onto the smaller plate as well (for single orders).
http://www.formulor.de/design/6PWUv
http://www.formulor.de/design/6PWUv
-
- Posts: 9
- Joined: Wed Jan 17, 2018 12:11 pm
Re: ZX Spectrum Next
Hi @PokeMon
its not possible to have also an hole in the left side of the front part of the case?
i will solder there the joystick ports...
Thanks
its not possible to have also an hole in the left side of the front part of the case?
i will solder there the joystick ports...
Thanks
Re: ZX Spectrum Next
Sorry - I don't do customization. Why can't you use the already soldered on the right side ???
-
- Posts: 9
- Joined: Wed Jan 17, 2018 12:11 pm
Re: ZX Spectrum Next
i think they could break easily when inserting/removing joysticks...
the board with the case will have the joysticks ports at the left and not the right ...
the board with the case will have the joysticks ports at the left and not the right ...
Re: ZX Spectrum Next
I don't think so. The mount variant is quite safe. Cables will be inserted and removed in horizontal position only. Mounting screws are overrated.brunosilva wrote: ↑Tue Jan 23, 2018 11:54 pm i think they could break easily when inserting/removing joysticks...
I know - but who ever has a board with a case will probably not remove that board from this hyper case ...brunosilva wrote: ↑Tue Jan 23, 2018 11:54 pm the board with the case will have the joysticks ports at the left and not the right ...
Anyway it is just an offer from me I made for my personal use of my NEXT board. I don't expect high volume orders and it is not really commercial as I earn less than 10% on the case - if at all when calculating manual time with countersinking and ordering distance parts, screws, plastic washers and so on. If nobody need, no problem.
You are free to modify the case while downloading SVG or do your own in general.
-
- Posts: 9
- Joined: Wed Jan 17, 2018 12:11 pm
Re: ZX Spectrum Next
i'll buy it and i will try to find someone that can cut me this one...
no problem... its a good case!
EDIT: just bought it!
no problem... its a good case!
EDIT: just bought it!