Hello,
I must admit that I have no experience with ribbon cable & sockets.
For me the described procedure with the pipe wrench worked very well ... and lasts only some minutes. Maybe this is owed the quality & size of the "V"-pins .....
Regards
Sascha
Lambda 8300/Power 3000 Mutlirom
-
- Posts: 57
- Joined: Fri Jul 22, 2011 2:13 pm
Re: Lambda 8300/Power 3000 Mutlirom
Hello,
a new draft version of the manual is now available:
http://www.eightbits.de/Manual-v011.pdf
Regards
Sascha
a new draft version of the manual is now available:
http://www.eightbits.de/Manual-v011.pdf
Regards
Sascha
Re: Lambda 8300/Power 3000 Mutlirom
sascha2000 has asked me to post these pictures I took of the wiring for the MultiROM in a Zeddy. Note that the two reset wires (for the ZX81 and for the ROM board) are connected together and extended out to a wire I simply touch to the modulator shield or the heat sink (ground) to do the reset. Not elegant, but it works.
Installed in my Lambda, the ZX81 compatible ROM runs great. I have used it to run the machine code game Deflection I posted at viewtopic.php?f=4&t=1201 (There's a picture of a screen there now too.)
I tested SAVE with the ZX81 compatible ROM image and then LOAD back to a real ZX81, which seems to work fine. Can't do that with a native Lambda!
Thanks Sascha, this is a great toy.
Ian
Installed in my Lambda, the ZX81 compatible ROM runs great. I have used it to run the machine code game Deflection I posted at viewtopic.php?f=4&t=1201 (There's a picture of a screen there now too.)
I tested SAVE with the ZX81 compatible ROM image and then LOAD back to a real ZX81, which seems to work fine. Can't do that with a native Lambda!
Thanks Sascha, this is a great toy.
Ian
Re: Lambda 8300/Power 3000 Mutlirom
Are the multiroms now available to buy?
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
Re: Lambda 8300/Power 3000 Mutlirom
Moved tosascha2000 wrote: ↑Thu Nov 08, 2012 9:18 am Hello iturbez,
its a ZX81 clone from Hong Kong.
Just have a look here: http://k1.dyndns.org/Vintage/Sinclair/8 ... ng%20Kong/
Regards
Sascha
https://k1.spdns.de/Vintage/Sinclair/80 ... ng%20Kong/