Which emulator and assembler for the Mac?

Emulator and emulator development specific topics
User avatar
BarryN
Posts: 21
Joined: Thu Nov 09, 2017 10:34 pm

Re: Which emulator and assembler for the Mac?

Post by BarryN » Fri Nov 17, 2017 9:24 am

Check out this emulator also, it is a fully native Mac application, not a wine bottle:

viewtopic.php?f=3&t=2650

User avatar
sirmorris
Posts: 2699
Joined: Thu May 08, 2008 4:45 pm
Location: oxon, uk

Re: Which emulator and assembler for the Mac?

Post by sirmorris » Fri Nov 17, 2017 9:26 am

BarryN wrote:
Fri Nov 17, 2017 9:16 am
To find the ZXpand_SD_Card folder look for a folder with a path like this: ..[snip].. When a wine bottle is first run, it copies the application to a virtual C drive path like the one above.

Thanks!
--=== ZXpand+ ... A more moderner all-in-one upgrade solution for ZX81 ===--
* SD/MMC storage * 32K Hires-capable RAM * AY sound chip * Joystick port * Serial *
* BASIC enhancements - plug & play * Reset button * Auto-boot facility *

User avatar
BarryN
Posts: 21
Joined: Thu Nov 09, 2017 10:34 pm

Re: Which emulator and assembler for the Mac?

Post by BarryN » Fri Nov 24, 2017 6:46 am

I have posted a newer Mac bottle of the EightyOne emulator at: https://drive.google.com/open?id=0B8RnV ... 0xHYWVJcWc

This package includes tools to give you easy access to some of the folders including the ZXpand SD Card folder. See screenshots below...
Screen Shot 2017-11-24 at 1.42.21 AM.png
Screen Shot 2017-11-24 at 1.42.21 AM.png (114.7 KiB) Viewed 181 times
Screen Shot 2017-11-24 at 1.43.14 AM.png
Screen Shot 2017-11-24 at 1.43.14 AM.png (81.38 KiB) Viewed 181 times

User avatar
sirmorris
Posts: 2699
Joined: Thu May 08, 2008 4:45 pm
Location: oxon, uk

Re: Which emulator and assembler for the Mac?

Post by sirmorris » Fri Nov 24, 2017 8:08 am

Thanks! I appreciate this very much. It's made development of ... the thing I'm doing ... a little easier!
--=== ZXpand+ ... A more moderner all-in-one upgrade solution for ZX81 ===--
* SD/MMC storage * 32K Hires-capable RAM * AY sound chip * Joystick port * Serial *
* BASIC enhancements - plug & play * Reset button * Auto-boot facility *

User avatar
BarryN
Posts: 21
Joined: Thu Nov 09, 2017 10:34 pm

Re: Which emulator and assembler for the Mac?

Post by BarryN » Fri Nov 24, 2017 12:55 pm

sirmorris wrote:
Fri Nov 24, 2017 8:08 am
Thanks! I appreciate this very much. It's made development of ... the thing I'm doing ... a little easier!
Your welcome. I noticed that in a demonstration video for the ZXpand there was a program used named "MEM.P" that showed the memory configuration. Any idea where I could get that?

User avatar
sirmorris
Posts: 2699
Joined: Thu May 08, 2008 4:45 pm
Location: oxon, uk

Re: Which emulator and assembler for the Mac?

Post by sirmorris » Fri Nov 24, 2017 3:42 pm

Here. It's a bit cheap. And because of mirroring excuses it reports RAM above 48k. So don't trust it.
Attachments
mem.p
(4.17 KiB) Downloaded 3 times
--=== ZXpand+ ... A more moderner all-in-one upgrade solution for ZX81 ===--
* SD/MMC storage * 32K Hires-capable RAM * AY sound chip * Joystick port * Serial *
* BASIC enhancements - plug & play * Reset button * Auto-boot facility *

User avatar
BarryN
Posts: 21
Joined: Thu Nov 09, 2017 10:34 pm

Re: Which emulator and assembler for the Mac?

Post by BarryN » Fri Nov 24, 2017 6:59 pm

Thanks! It looks like it was written in a C IDE? You don't happen to have the source code and know which IDE do you?

User avatar
Paul
Posts: 880
Joined: Thu May 27, 2010 7:15 am
Location: Germanys west end

Re: Which emulator and assembler for the Mac?

Post by Paul » Tue Nov 28, 2017 3:48 pm

I have problems starting these version on my MacBook Pro with Sierra :oops:
After unzipping I copied it into the Program folder.
Starting it said it wasn't authorized so I started the scurity sessions and allowed opening the file.
I had to repeat this for the SD-Card folder icon (and the others) as well.
When I start eo it is checked by security and it asked me if i would like to open it (downloaded from internet). I answered yes and Eo icon appeard in the dock and disappeared a few seconds later.
now every time i doubleclick it the dock will show the icon for aprox. half a second and nothing happens.
if I try the SDCARD folder it tells me folder doesn't exist, I have to run eo first :(
What am I doing wrong?
How can I reset the made decisions and start a new try?
Kind regards
Paul
In theory, there is no difference between theory and practice. But, in practice, there is.

User avatar
PokeMon
Posts: 2171
Joined: Sat Sep 17, 2011 5:48 pm

Re: Which emulator and assembler for the Mac?

Post by PokeMon » Tue Nov 28, 2017 4:19 pm

Have you WINE installed ?
For me it's working on Mac with latest El Capitan.
I am impressed how EightyOne did develope itself - maybe my previous version is several years old. :mrgreen:

I wonder what the folder apps are created for.
At least one folder app would be sufficient to navigate.
But this is maybe a matter of choice ...

User avatar
Paul
Posts: 880
Joined: Thu May 27, 2010 7:15 am
Location: Germanys west end

Re: Which emulator and assembler for the Mac?

Post by Paul » Tue Nov 28, 2017 4:31 pm

No wine installed on my Mac.
I thought it was self contained?
I'm going to install wine and try again.
Kind regards Paul
In theory, there is no difference between theory and practice. But, in practice, there is.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest