a galaxion clone with UDG's

General games-related topics
Post Reply
Moggy
Posts: 1505
Joined: Wed Jun 18, 2008 1:00 pm

a galaxion clone with UDG's

Post by Moggy » Sat Sep 09, 2017 10:14 pm

A conversion of a galaxion clone taken from a file found at Simon Holdsworth's excellent site....

http://www.zx81stuff.org.uk/zx81/tape/G ... sAndGloops.


Keeping the three files in the same folder load and run GALIXREM.P which will load and set the UDG's then it will load the main program which isn't self running so just run and follow on screen instructions for speed, fire rate and swoop rate.
(in the absence of any instructions that came with the file I deduce a number between 1-9 is required for each)

another one for external keyboards I think as it's damn fast especially for a klutz like me! :lol:

UDG board owners please set to 128 and for Eighty one users make sure CHR$16 is set and ZXpand mode on.
The REM loader works for both emulator and real zeddy (thanks Andy for putting me right on that one)
Attachments
galaxian.zip
(4.52 KiB) Downloaded 25 times

User avatar
Andy Rea
Posts: 1264
Joined: Fri May 09, 2008 1:48 pm
Location: notts UK

Re: a galaxion clone with UDG's

Post by Andy Rea » Sat Sep 09, 2017 10:32 pm

Cool, can't give it a go just yet not near any real hardware or eightyone equipped PC...

Andy
6 x ZX81, 1 x TS1500 , 1 x +3e, 1 x timex 2040 printer, 1 x timex 2020 cassette deck, siclair printer and some spectrum

User avatar
gammaray
Posts: 248
Joined: Sun Apr 17, 2016 1:44 am
Location: Texas

Re: a galaxion clone with UDG's

Post by gammaray » Sun Sep 10, 2017 1:31 am

I'm not having any luck. Scrambled eggs on screen (digitized camoflauge). EO settings?


I don't know if this was the fix but ... I saved a config ini file from menu...also set to 16K... ill retest
Finish what you start. Truth is over the mountaintop or six feet under.
4 x TS1000, 2 x TS1500 , 2 x timex 2040 printer, 1/2 x timex 2020 cassette deck, ZXPAND, ZeddyNET, ZXBlast..., unfinished Spectrum...

User avatar
Andy Rea
Posts: 1264
Joined: Fri May 09, 2008 1:48 pm
Location: notts UK

Re: a galaxion clone with UDG's

Post by Andy Rea » Sun Sep 10, 2017 10:52 am

works okay for me... you have to have CHR$16 selected and make sure HI-RES is set to NONE

one thing i cant help is maybe it should have been called attack of the killer carrots :D

it is mighty fast :-)

Andy
6 x ZX81, 1 x TS1500 , 1 x +3e, 1 x timex 2040 printer, 1 x timex 2020 cassette deck, siclair printer and some spectrum

Moggy
Posts: 1505
Joined: Wed Jun 18, 2008 1:00 pm

Re: a galaxion clone with UDG's

Post by Moggy » Sun Sep 10, 2017 12:31 pm

One error I made was saying it required values between 1-9 for speed etc.

Try entering 0 for all three values much more playable then. :D

Post Reply

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest