Page 5 of 11

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Sat Nov 02, 2013 2:17 pm
by Jungsi
I would also like to take two interfaces. Best for me would be if they were completely finished - including programmed GAL's (I'am no so good at soldering). ;) If that's too much work or it's better to send it
unsolderd to Germany than I can find someone here for soldering.

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Sat Nov 02, 2013 2:47 pm
by msch
Hi kmurta,

I would like to buy 2 (one more than I wrote before) boards - pcb and parts (incl. pre-programmed GAL) if possible.

Mathias

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Sat Nov 02, 2013 4:55 pm
by PokeMon
I don't know how many boards you have or can deliver now - remember I was the first one asked. :P

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Sat Nov 02, 2013 7:26 pm
by Paul
If you don't have enough boards I wouldn't mind having a batch produced here in Germany in case you would send me the board files (and even transfer you a fee per sold board)
It's up to you.
Kind regards
Paul

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Sun Nov 03, 2013 8:43 am
by amauget
Greetings from France,

I'm also interested in the JOY81. I can solder so I only need a kit (board, components, connectors, ...).
Just let me know how much to ship to my country.

Keep up the good work !

BTW, I already bought many ICs from G&C Supermarket on eBay. Always a five star service.

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Sun Nov 03, 2013 9:08 pm
by kmurta
Hello to all!

Do not worry, I believe there are enough boards for everyone (30 pcb's) and parts enough to mount at least 10 interfaces. But there are a restriction with the piggyback pcb's, for which I only have 10 units.

Until the moment I have registered the following intentions:

PokeMon - 1 mounted JOY81 ?
tdg8934 - 1 mounted JOY81 ?
msch - 2 pcb + full parts
1024MAK - 1 pcb + programmed GALs
Paul - 2 pcb
siggi - 2 pcb
Jungsi - 2 mounted JOY81
amauget - 1 pcb + full parts

So, according to these varied intentions placed here I give you four options:
  • Set 1 - (JOY81 pcb + piggyback pcb) - 7.50 EUR
    Set 2 - (JOY81 pcb + piggyback pcb + programmed GALs) - 11.00 EUR
    Set 3 - (JOY81 pcb + piggyback pcb + full parts) - 18.00 EUR
    Set 4 - (JOY81 mounted) - 23.00 EUR
The shipment to Europe is 12.14 EUR. (Yes, it's expensive, but I can not do much about it, sorry :oops: )

If you are in agreement with these conditions, I will accept orders during the week with possible shipments from November 11. Please, contact me in PVT at kmurta@yahoo.com.br and confirm which set you want, informing too the postal address for shipment. Payments via Paypal to kmurta@yahoo.com.br.

I'm open to any questions or suggestions.

Thanks,
Kelly Murta

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Mon Nov 04, 2013 12:18 am
by kmurta
For anyone who is in doubt, this is the piggyback pcb:
piggyback.png
piggyback.png (238.71 KiB) Viewed 4918 times
If you don't need it (because you already have one), tell me in your order and discount 1.40 EUR from price of sets 1, 2 and 3.

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Mon Nov 04, 2013 12:27 am
by PokeMon
Okay - ordered and already payed. 8-)

Set 4 - (JOY81 mounted) - 23.00 EUR

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Mon Nov 04, 2013 8:52 am
by Paul
Money sent.
There was a warning you might refuse the payment because you don't have an account in this euro.
Maybe you give prices in your own currency?
Kind regards
Paul

Re: JOY81 - Programmable Joystick Interface for ZX81

Posted: Mon Nov 04, 2013 11:54 am
by msch
Hi kmurta,

what is the price for JOY81 pcb + full parts - without the piggyback pcb?

Edit: forget my question! :oops:

I don't need it because I got this:
extender.JPG
extender.JPG (126.26 KiB) Viewed 4910 times
Sorry for the circumstances...

Mathias