ZIF Socket and ZXmore
Re: ZIF Socket and ZXmore
From photos above, it appears a DIP chip will fit a ZIP or DIP socket?
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
Re: ZIF Socket and ZXmore
Pokemon,
I found a list of the Aries Electronics distributors for the Germany.
https://www.arieselec.com/distributors/Germany.htm
And Mouser Electronics;
Mouser Electronics
Germany (Main Branch)
Elsenheimerstr. 11
80687 Munich
Germany
Local: +49 (0)89 520 462 110
From what I learned online;
3M creates their own Textool products.
Sincerely yours,
Dessony
I found a list of the Aries Electronics distributors for the Germany.
https://www.arieselec.com/distributors/Germany.htm
And Mouser Electronics;
Mouser Electronics
Germany (Main Branch)
Elsenheimerstr. 11
80687 Munich
Germany
Local: +49 (0)89 520 462 110
From what I learned online;
3M creates their own Textool products.
Sincerely yours,
Dessony
Re: ZIF Socket and ZXmore
1024MAK,
If you want any ZIF sockets with its round contact pins in the future, try this;
https://www.arieselec.com/distributors/ ... ingdom.htm
Sincerely yours,
Dessony
If you want any ZIF sockets with its round contact pins in the future, try this;
https://www.arieselec.com/distributors/ ... ingdom.htm
Sincerely yours,
Dessony
Re: ZIF Socket and ZXmore
Mouser is right down the road from me! I have stacks and stacks of their catalogues.
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
Re: ZIF Socket and ZXmore
Yes I know Mouser and do order regularly.dessony wrote: ↑Sun Dec 03, 2017 4:46 pm Pokemon,
I found a list of the Aries Electronics distributors for the Germany.
https://www.arieselec.com/distributors/Germany.htm
And Mouser Electronics;
They don't have a german stock here, all I order comes from US stock with Fedex within 2 or 3 days.
The german address is only a bureau with a few representatives.
I think it comes from Mansfield, Texas.
Re: ZIF Socket and ZXmore
PokeMon and gammaray,
Both of you are correct!
Gammaray, go there and ask a clerk for an Aries ZIF socket bearing xx-655x-xx. You'll be very pleased that the certain socket's round pins will fit smoothly into the precision turned pin socket without any struggle nor needing a sledgehammer!
Thanks.
Sincerely yours,
Dessony
Both of you are correct!
Gammaray, go there and ask a clerk for an Aries ZIF socket bearing xx-655x-xx. You'll be very pleased that the certain socket's round pins will fit smoothly into the precision turned pin socket without any struggle nor needing a sledgehammer!
Thanks.
Sincerely yours,
Dessony
- 1024MAK
- Posts: 5165
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: ZIF Socket and ZXmore
Thanks. Mouser also sells within the U.K. (well, sends from the U.S.A.).dessony wrote: ↑Sun Dec 03, 2017 4:56 pm 1024MAK,
If you want any ZIF sockets with its round contact pins in the future, try this;
https://www.arieselec.com/distributors/ ... ingdom.htm
Sincerely yours,
Dessony
I'll have a look when I next order some parts.
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer being good this year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer being good this year.
Re: ZIF Socket and ZXmore
Gammaray,
I quoted a part of your post above-mentioned.
"not what they need to be for a DIP
----------------------------
----------------------------"
The Aries ZIF socket's round contact pins look like this:
............................
............................
The Aries socket will fit smoothly onto this kind of the DIP socket without needing to fetch a mallet or a sledgehammer!
Dessony
I quoted a part of your post above-mentioned.
"not what they need to be for a DIP
----------------------------
----------------------------"
The Aries ZIF socket's round contact pins look like this:
............................
............................
The Aries socket will fit smoothly onto this kind of the DIP socket without needing to fetch a mallet or a sledgehammer!
Dessony