My zx80/zx81 clon is working
My zx80/zx81 clon is working
I have the pleasure to present you my new zx80/zx81 clon.
It is a my design, starting from the great work of Grant Searle.
Added to the original one:
- Modes zx80/zx81.
- Easy to change keyboard overlays (zx80/zx81)
- Black porch generation (thanks to jose_leandro)
- reset button, and switch.
- 3D case similar to the original one (thanks to alvaroalea)
Special thanks to Grant Searle for his fantastic work, and to José Leandro because he did help me to get it works.
Bellow you can find some pictures of it.
With ZX80 keyboard
With ZX81 keyboard
Bottom View
Internal View
Metal Domes
Working
Bottom View of the board
Schematics
Lets see a little video (sorry it is in spanish)
https://www.youtube.com/watch?v=J704OPZSakM
I am an IT engineer, but I am not an electronics expert. I've turned computer hardware design into my hobby 4 years ago.
My dream was to build my own computer, and with this design I got it.
Many thanks to Grant Searle. I have taken his great work as starting point and I have did little modifications to get my schema, and then I have changed the board distribution to make room for my changes.
The black porch generation schema is from Jose Leandro. He helps me to improve the final routing of the board.
The case is designed and 3d printed by alvaroalea, I think it have did a very good job. It is the most similar to the original one that we could do.
Due to it we don't want to add holes not present in the original case, and the consecuence is the ON/OFF switch, reset button, and ZX80/ZX81 selector are not accesibles from outside if you use the case.
To solve this problem I have designed a little board to connect it to the expansion board, and then add externally this elements. It is only a protoboard but I'll plan to make it in a final board.
I'm making a little batch of 20 units in a spanish forum called vaderetro. If somebody is interested it is possible to get some units yet.
It is a my design, starting from the great work of Grant Searle.
Added to the original one:
- Modes zx80/zx81.
- Easy to change keyboard overlays (zx80/zx81)
- Black porch generation (thanks to jose_leandro)
- reset button, and switch.
- 3D case similar to the original one (thanks to alvaroalea)
Special thanks to Grant Searle for his fantastic work, and to José Leandro because he did help me to get it works.
Bellow you can find some pictures of it.
With ZX80 keyboard
With ZX81 keyboard
Bottom View
Internal View
Metal Domes
Working
Bottom View of the board
Schematics
Lets see a little video (sorry it is in spanish)
https://www.youtube.com/watch?v=J704OPZSakM
I am an IT engineer, but I am not an electronics expert. I've turned computer hardware design into my hobby 4 years ago.
My dream was to build my own computer, and with this design I got it.
Many thanks to Grant Searle. I have taken his great work as starting point and I have did little modifications to get my schema, and then I have changed the board distribution to make room for my changes.
The black porch generation schema is from Jose Leandro. He helps me to improve the final routing of the board.
The case is designed and 3d printed by alvaroalea, I think it have did a very good job. It is the most similar to the original one that we could do.
Due to it we don't want to add holes not present in the original case, and the consecuence is the ON/OFF switch, reset button, and ZX80/ZX81 selector are not accesibles from outside if you use the case.
To solve this problem I have designed a little board to connect it to the expansion board, and then add externally this elements. It is only a protoboard but I'll plan to make it in a final board.
I'm making a little batch of 20 units in a spanish forum called vaderetro. If somebody is interested it is possible to get some units yet.
Last edited by wilco2009 on Sun May 21, 2017 12:34 am, edited 2 times in total.
Re: My zx80/zx81 clon is working
WOW!!
Well done sir excellent work.
Well done sir excellent work.
-
- Posts: 325
- Joined: Sat Sep 27, 2014 8:02 pm
- Location: Stockholm, Sweden
Re: My zx80/zx81 clon is working
brilliant, great work
what's that Smell.... smells like fresh flux and solder fumes...
Re: My zx80/zx81 clon is working
Congratulation.
Re: My zx80/zx81 clon is working
It's looking good.
Wouldn't you please show your schematics and hardware pics?
Kind regards Paul
Wouldn't you please show your schematics and hardware pics?
Kind regards Paul
In theory, there is no difference between theory and practice. But, in practice, there is.
Re: My zx80/zx81 clon is working
Por que? What is this?
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
Re: My zx80/zx81 clon is working
I have explained it now in the first message.
The case is designed and 3d printed by alvaroalea, I think it have did a very good job. It is the most similar to the original one that we could do.
Due to it we don't want to add holes not present in the original case, and the consecuence is the ON/OFF switch, reset button, and ZX80/ZX81 selector are not accesibles from outside if you use the case.
To solve this problem I have designed a little board to connect it to the expansion board, and then add externally this elements. It is only a protoboard but I'll plan to make it in a final board.
Re: My zx80/zx81 clon is working
I have added some pictures and additional information to the first message.
I hope this is interesting for you.
I hope this is interesting for you.