ADDRESSING RAM AT 16K+

Discussions about Sinclair ZX80 and ZX81 Hardware
User avatar
gammaray
Posts: 590
Joined: Sun Apr 17, 2016 2:44 am
Location: Texas

Re: ADDRESSING RAM AT 16K+

Post by gammaray »

No wonder my chip-select / write enable didnt work!
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: ADDRESSING RAM AT 16K+

Post by XavSnap »

siggi wrote: Thu Oct 19, 2017 9:59 am There is still an error in this schematic: At edge connector side A pin 1 should be D7' (not D7)
Siggi
:oops:
All mys confused !
Thanks Siggi, it now a ~D7'~.
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
User avatar
fordp2002
Posts: 52
Joined: Tue Aug 15, 2017 2:49 pm
Location: Cambridgeshire, UK

Re: ADDRESSING RAM AT 16K+

Post by fordp2002 »

1024MAK wrote: Wed Oct 18, 2017 7:04 pm If you look at this schematic (where some errors have been corrected, ignore the French video circuitry) which shows the edge-connector connection points (the X's in square boxes), it may help.
Image

Both /ROMCS and /RAMCS have series resistors between the ULA and the relevant chips. The edge connector pins are on the memory side of the resistors. Hence why the ULA outputs can be safely overridden.

Mark
Is it me or does that Z80 not have two PIN 19s. I think Halt is PIN 18!
FordP (Simon Ellwood)
Time is an illusion. Lunchtime, doubly so!
User avatar
1024MAK
Posts: 5101
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: ADDRESSING RAM AT 16K+

Post by 1024MAK »

Yes, /HALT is on pin 18. Thanks for spotting that error!

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer later in the year.
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: ADDRESSING RAM AT 16K+

Post by XavSnap »

Hi,

Thanks!
Picture updated to clear the Z80 pinout.
z80.JPG
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
Post Reply