When cards go onto the back of the zeddy, they're vertical. What I'm after is an edge connector which will allow the card to be horizontal.
Reason I'm looking for this, is to fit into a new case, without having to raise the height internally.
I've tried, but so far I've failed. I can only find the vertical type.
Any ideas please?
90 degree card connector?
90 degree card connector?
All that I've learned - https://msknight.com/bbc/index.html#zx81
- 1024MAK
- Posts: 5141
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: 90 degree card connector?
Do you mean an adaptor for existing add-ons, or just the female edge-connector socket?
Mark
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
Re: 90 degree card connector?
Just an edge connector socket please.
All that I've learned - https://msknight.com/bbc/index.html#zx81
Re: 90 degree card connector?
I bought these.
Please note, that any edge connector has closed sides. That means it will not fit the ZX81. You need to cut off the sides with a Dremel or the like, to connect it to the ZX81.
https://www.aliexpress.com/item/4001146953252.html
Please note, that any edge connector has closed sides. That means it will not fit the ZX81. You need to cut off the sides with a Dremel or the like, to connect it to the ZX81.
https://www.aliexpress.com/item/4001146953252.html
Re: 90 degree card connector?
Cheers. I've got some of those ordered. The only other place that seems to stock is Mouser and then there's postage, etc. so not worth ordering from Mouser on their own.
All that I've learned - https://msknight.com/bbc/index.html#zx81