New release of EightyOne available

Emulator and emulator development specific topics
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: New release of EightyOne available

Post by sirmorris »

Err which ROM is it? And how are you starting EO? The ROM is found by adding the name from the selection box there to the current working folder. If you start EO by a shortcut and the working folder is set to not be the root of the EO folder then the ROM load will fail.
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: New release of EightyOne available

Post by sirmorris »

dr beep wrote: Sun Aug 13, 2017 9:16 am I didn't download current version yet, but the "bug" I keep having is when disabling NMI and intrupt in the debugger.
When you undo that EO can hang. I think this is caused when you go to the debugger and you disable the display when EO is in
intruptmode and best is to stop running when undoing.
I've seen this happen. I'm looking into the problem but there doesn't seem to be an obvious cause.
Moggy
Posts: 3231
Joined: Wed Jun 18, 2008 2:00 pm

Re: New release of EightyOne available

Post by Moggy »

sirmorris wrote: Wed Aug 16, 2017 8:02 am Err which ROM is it? And how are you starting EO? The ROM is found by adding the name from the selection box there to the current working folder. If you start EO by a shortcut and the working folder is set to not be the root of the EO folder then the ROM load will fail.
Solved it Charlie.

I usually download things on a downstairs PC bung it on my ZX81's spand card and transfer to upstairs PC.
The short version is card must be on its way out as it has corrupted certain things I've downloaded/added(including 150 ZXM files bummer!) the ROM file must have been one as original download transferred via new card all OK. :oops:
User avatar
siggi
Posts: 988
Joined: Thu May 08, 2008 9:30 am
Location: Wetterau, Germany
Contact:

Re: New release of EightyOne available

Post by siggi »

What has to be configured to see UDG (e. g. at $2000) on new EO versions? I can see UDG only using old EO versions <= V1
Siggi
My ZX81 web-server: online since 2007, running since dec. 2020 using ZeddyNet hardware
http://zx81.ddns.net/ZxTeaM
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: New release of EightyOne available

Post by Andy Rea »

Hi Siggi,

I have been using CHR$ 16 in eightyone, if bit 0 of the i reg = 0 then it's 64 char with the normal 64 inverted chars, if bit 0 of the i reg = 1 then it's 128 char mode

Hth Andy

P.s also some software's use the quiksilva mode
what's that Smell.... smells like fresh flux and solder fumes...
User avatar
siggi
Posts: 988
Joined: Thu May 08, 2008 9:30 am
Location: Wetterau, Germany
Contact:

Re: New release of EightyOne available

Post by siggi »

Hmm, my interceptor does not work: has 512 bytes UDG (copied from Sinclair charset) to $2000

Result is (EOv1.6, ZX81 ed. 2 ROM):
UDG.jpg
UDG.jpg (101.57 KiB) Viewed 3747 times
interc-u.p
(12.71 KiB) Downloaded 190 times
:(
Siggi
My ZX81 web-server: online since 2007, running since dec. 2020 using ZeddyNet hardware
http://zx81.ddns.net/ZxTeaM
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: New release of EightyOne available

Post by Andy Rea »

working for me, hardware setting are zx81 16k ram sound none, chr$16, highres none, colur none, rom cartrige none, other boxes unchecked, 8 - 16K ram enabled.

Image

regards Andy
what's that Smell.... smells like fresh flux and solder fumes...
User avatar
siggi
Posts: 988
Joined: Thu May 08, 2008 9:30 am
Location: Wetterau, Germany
Contact:

Re: New release of EightyOne available

Post by siggi »

I had WRX enabled!
Now it works as expected.
Thanks
Siggi
My ZX81 web-server: online since 2007, running since dec. 2020 using ZeddyNet hardware
http://zx81.ddns.net/ZxTeaM
User avatar
zsolt
Posts: 214
Joined: Wed Apr 20, 2011 11:43 am
Location: Fót, Hungary

Re: New release of EightyOne available

Post by zsolt »

Hi,
I also tried the new version and got the same error message (Win10 Home Edition):
Moggy wrote: Every time I boot up Eighty One I get a box that says "ROM file for this system not found go to Options>Hardware>Advanced Settings>ROM File." followed by another box which says "ROM load failed"
However, the ROM file has been loaded and works normally - but writes these false messages. :roll:

Then I tried it on another machine where Symantec Endpoint Protection was installed (Win7 32bit)
I got this
I got this
EightyOne1v6.png (41.47 KiB) Viewed 3708 times
Clicking the Close button the "EightyOne.exe" disappeared. What to do?
Thanks,
Zsolt
ZX81 (8K), ENTERPRISE 128, [ZX SPECTRUM (48K,+,+128K,+2,+2A), TS1000, TS1500, TS2068, Cambridge Z88, PRIMO A64 (red)]
User avatar
zsolt
Posts: 214
Joined: Wed Apr 20, 2011 11:43 am
Location: Fót, Hungary

Re: New release of EightyOne available

Post by zsolt »

The latter was solved (i had to allow the file) and works well, but i get those false messages.
ZX81 (8K), ENTERPRISE 128, [ZX SPECTRUM (48K,+,+128K,+2,+2A), TS1000, TS1500, TS2068, Cambridge Z88, PRIMO A64 (red)]
Post Reply