Sinclair ZX80 / ZX81 / Z88 Forums

Although the picture is quite blurred It looks like the solder coating has worn down to the copper tracks underneath in places making the edge connection unreliable, I would do as stroebeljc advises and re-coat the edge connector with solder.

Your screenshot seems not to match Stefano's.

I have all issues of ZXpand including a recent prototype and like Paul have no problem with wobble whatsoever so yeah perhaps dirty or worn/uneven plating on edge connector.

yes, 16K or larger capacity RAM packs for the ZX81 should work fine with a TS1000. Also 2K, 3K and 4K made for ZX80 work fine on a ZX81 or TS1000 I Thought a track had to be cut in these ZX80 RAM packs for them to work rather than plug and play as your post suggests, apologies if I've misunderstood...

Unless it's usable on a real zeddy I can't see the point other than a proof of concept for emulator use, if it's just a see what's possible exercise for Eighty One then yes I get it but something for real kit would be more useful I would have thought.

Tried it on real zeddy with ZXpand and it just crashes to the cursor.
Some instruction on how you want it used, type of set up, real kit or emulator etc would be useful.

520 odd guests online not bad for a niche forum!

Click picture to zoom.

Paul is correct in my opinion. The 80's edge connectors were terrible whereas the modern replacements are far better, one example is of those fitted to Charlie Robson's Zxpands. The white issue 6 I have from him has an edge connector that grips like a vice and like all my other spands suffers no wob...

Mentioned on a few other forums too, luckily I have about a dozen or so in my spares box mainly Zilogs including a few CMOS ones which should be enough to see my time out.

I can test but only on LCD monitor as I no longer have a CRT monitor, also is this to be tested with UDG4ZXpand or just plain zeddy?