Sinclair ZX80 / ZX81 / Z88 Forums

Posted: **Fri Jun 10, 2022 9:54 am**

Perhaps not too difficult to do. The dfile is fixed at 407Dh, so that's a main change to a game that allows it to run on the Lambda

But what about using the maximum RAM by coding over the System Variables? Devilishly tricky

Here is Game1 of Dr. Beeps gamecoding course

: Game1 running on NO$ZX emulator

Well, kind of running. At least it found the BASIC line and creates a display

The first challenge is that the "next basic line" System Variable is changed on the Lambda to be where E_PPC is on a ZX81. Looks like the next challenge is to debug it. Does it not like the abbreviated dfile ending with E9? Or is just a simple typo somewhere?

Posted: **Fri Jun 10, 2022 10:54 am**

The most complex documentation I've found for the Lambda 8300 is in German:

https://airtable.com/shrXP65XwdIFSDVn3/ ... UoME2mOckk

Posted: **Fri Jun 10, 2022 11:17 am**

If you are interested in getting the real hardware, one just showed up on eBay:

https://www.ebay.de/itm/334468975000

Posted: **Fri Jun 10, 2022 11:32 am**

wow, quite a book

These are necessary porting changes, similar to what I used on the Tasword port:

1. DFILE_ADDR is hardcoded to 407Dh (16393)

2. update critical System Variables. For the 1K game specifically:
PROGRAM (where D_FILE is on ZX81)
NXTLINE (where E_PPC is on ZX81)

3. keyword translation. The one BASIC line here only uses GOTO (no change) and USR (bytecode differs)
USR token = 212 (ZX81) 208 (Lambda)

4. the usual Lambda characters changes (most importantly colon and question mark characters), which are not used by the 1K game

5. ROM calls. 07BDh is called. This is DECODE which works totally different in the Lambda.rom
The DECODE routine can be copied from ZX81 ROM, but the KEY TABLES are fairly sizeable

Code: Select all

   DECODE:
        LD      D,0        
        SRA     B          
        SBC     A,A        
        OR      $26        
        LD      L,5        
        SUB     L          
   KEY_LINE:
        ADD     A,L        
        SCF                
        RR      C          
        JR      C,KEY_LINE 
        INC     C          
        RET     NZ         
        LD      C,B        
        DEC     L          
        LD      L,1        
        JR      NZ,KEY_LINE
        LD      HL,KEY_TABLES-1
        LD      E,A
        ADD     HL,DE      
        SCF                
        RET

KEY_TABLES:     ;only unshifted keys are tabled here to save space
;Unshifted 007E-00A4
          ; Z   X   C   V
   db     $3F,$3D,$28,$3B
      ; A   S   D   F   G
   db $26,$38,$29,$2B,$2C
      ; Q   W   E   R   T
   db $36,$3C,$2A,$37,$39
      ; 1   2   3   4   5
   db $1D,$1E,$1F,$20,$21
      ; 0   9   8   7   6
   db $1C,$25,$24,$23,$22
      ; P   O   I   U   Y
   db $35,$34,$2E,$3A,$3E
      ;N/L  L   K   J   H
   db $76,$31,$30,$2F,$2D
      ;[ ]  .   M   N   B
   db $00,$1B,$32,$33,$27

DECODE appears to be at $1489 (1489h) in Lambda.rom, but no success in calling it

Posted: **Sat Jun 11, 2022 4:56 am**

the Lambda does not like the dfile "jp (hl)" method of ending a partial dfile. Even worse, as far as i can tell, it doesn't like partial lines, or a collapsed display file whatsoever

Which means many of the advanced 1K games won't fit in 1K on the Lambda

but is that a problem? The Lambda comes standard with 2K so all 1K games should run!

Posted: **Sat Jun 11, 2022 1:13 pm**

Yep. Updating dfile to use full-size works. Only had to modify the Up and Down routines to add/subtract 33 instead of 21

P file execution TESTED ON

NO$ZX v2.0 for Windows EMULATOR using setting 'LAMBDA 8300 (ZX81 revision)' with 2K
(NO$ZX = nocash ZX emulator by Martin Korth)

EightyOne emulator 'Lambda 8300' with 32K & "Lambda.rom"
This emulator doesn't boot with less than 32K

Posted: **Sat Jun 11, 2022 1:17 pm**

David G wrote: ↑Sat Jun 11, 2022 4:56 am the Lambda does not like the dfile "jp (hl)" method of ending a partial dfile. Even worse, as far as i can tell, it doesn't like partial lines, or a collapsed display file whatsoever

Which means many of the advanced 1K games won't fit in 1K on the Lambda

but is that a problem? The Lambda comes standard with 2K so all 1K games should run!

How does the Lambda react on "executable" opcodes on the screen, like LD B,B
These hidden commands are part of my games, like in SNAKEBINGO where these opcodes hide the direction the tail moves in. On MINESWEEPER with these opcodes information of the minefield is stored on the screen.
PATHMAZE has the whole maze hidden, just like HIDDEN PICTURE 1,2 and 3

Posted: **Sat Jun 11, 2022 1:26 pm**

I will test. Can you provide sample code?

Posted: **Sat Jun 11, 2022 1:30 pm**

Maybe the tests should be on real hardware, as most emulators for Lambda 8300 reuse ZX81 code, and change a few things to compensate for Lambda, maybe not knowing how the Lambda 8300 really works.

Posted: **Sat Jun 11, 2022 1:33 pm**

I’ve previously tested how executing code above 32k works. It works fine without M1NOT modification. So here the ULAs are quite different.

Sinclair ZX80 / ZX81 / Z88 Forums

1K lowres games in machinecode on a Lambda

1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda

Re: 1K lowres games in machinecode on a Lambda