Zx Spectrum 128k +2 (SCART to VGA or HDMi)

[elmanoduarte]

Hi ..greatings for all here i m ..again.

Now... best way to make conversion from the RGB -SCART to VGA monitor or HDMi ?

Is in fact that possible?

Regards
Duarte

[1024MAK]

For HDMI the best method is by using an interface that plugs into the expansion port/edge connector. For example the ZX-HD HDMI INTERFACE.

There is also the RGB to HDMI using a Pi Zero and a small CPLD project, but I don’t know if or who is making these at the moment.

For VGA, have a look at the ZX-VGA-JOY.

I don’t use any of these with a ZX Spectrum, so am unable to help further.

There may well be other devices that I don’t know about.

There are SCART to HDMI converters on trading sites. But it’s a minefield buying one. You need one that does SCART RGB. All the very inexpensive units don’t work with SCART RGB. Some of the units in metal cases may work.

Mark

[elmanoduarte]

Ok, many thanks for your help.
O will see ot, and mabe i ll test some converter s.
An ebay seller said it has a small box feeded by a small power supply, he say ot could work.
Its not much, o will test.
For much money, its better nuy a 24" TV with scart.

Thanks,
Best regards

[elmanoduarte]

Soon i will have it.
I will let the result here.
Let see what happen!