Harlequin 48K - Loud Speaker Circuit
Posted: Fri Jan 14, 2022 7:52 pm
Hello,
If I don't want to use the internal speaker (audio will be routed via the RGB connector to the TV's speaker, using the SCART input), am I correct in assuming I don't need to solder the follwoing components:
- Transistor Q5 (BC548)
- Diode D9 (1N4148)
- Resistor R47 (22K)
- Capacitor C34 (0.1uF)
A good weekend to all,
If I don't want to use the internal speaker (audio will be routed via the RGB connector to the TV's speaker, using the SCART input), am I correct in assuming I don't need to solder the follwoing components:
- Transistor Q5 (BC548)
- Diode D9 (1N4148)
- Resistor R47 (22K)
- Capacitor C34 (0.1uF)
A good weekend to all,
