Hi! From the Netherlands...

Introduce yourself to your fellow forum members - what was your journey into the Sinclair world?
Post Reply
MaFli
Posts: 75
Joined: Mon May 08, 2017 5:14 pm

Hi! From the Netherlands...

Post by MaFli »

Hi All!

Just realised that this forum has been here quite a while. Sorry... I did post a few comments recently without letting you know who I am. For those interested, I am an electronic engineer. And quite a nerd (which is a good thing nowadays...). Anyway, I dug up my collection of ZX/QL machines recently, removed the dust and got goosebumps I got many years ago. I'm back...
Good to be here with many enthousiasts!

Cheers,
MaFli
User avatar
gammaray
Posts: 590
Joined: Sun Apr 17, 2016 2:44 am
Location: Texas

Re: Hi! From the Netherlands...

Post by gammaray »

Howdy! from Texas...
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
User avatar
zx81jens
Posts: 201
Joined: Sat May 10, 2008 8:26 am
Location: a Basement in Nienburg / Germany

Re: Hi! From the Netherlands...

Post by zx81jens »

Hey.

Welcome and greetings from the German Neighbours...

Jens
eyerything will be okay in the end.
if it´s not okay, it´s not the end.

and: uıɐbɐ ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ɹǝʌǝ ɹǝʌǝu ןןıʍ ı
RWAP
Posts: 1348
Joined: Thu May 08, 2008 8:42 am
Location: Stoke-on-Trent, UK
Contact:

Re: Hi! From the Netherlands...

Post by RWAP »

Welcome to the forums - it is always nice to introduce yourself but not obligatory :)
dr beep
Posts: 2060
Joined: Thu Jun 16, 2011 8:35 am
Location: Boxmeer

Re: Hi! From the Netherlands...

Post by dr beep »

Hello MaFli,

Greetings from Boxmeer and welcome.

Johan "Dr Beep" Koelman
MaFli
Posts: 75
Joined: Mon May 08, 2017 5:14 pm

Re: Hi! From the Netherlands...

Post by MaFli »

Thanks everyone. Good to see this forum is still alive :-)
RWAP wrote: Sat May 13, 2017 10:40 am Welcome to the forums - it is always nice to introduce yourself but not obligatory :)
You're welcome! I actually ordered a membrane from you last week. And some rivets.

I'm in the proces of redrawing the ZX80 in my CAD program so I can create a set of gerber files. But that is another story...
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: Hi! From the Netherlands...

Post by PokeMon »

MaFli wrote: Sat May 13, 2017 5:09 pm Thanks everyone. Good to see this forum is still alive :-)
Not just alive, sometimes quite frequently used by its members.
MaFli
Posts: 75
Joined: Mon May 08, 2017 5:14 pm

Re: Hi! From the Netherlands...

Post by MaFli »

PokeMon wrote: Sat May 13, 2017 5:44 pm
MaFli wrote: Sat May 13, 2017 5:09 pm Thanks everyone. Good to see this forum is still alive :-)
Not just alive, sometimes quite frequently used by its members.
LOL! :-) I'll try to add my bit!

p.s. Thanks for sending the "bits and bobs" I ordered a few days ago...
Post Reply