New release of EightyOne available

Emulator and emulator development specific topics
Fruitcake
Posts: 340
Joined: Wed Sep 01, 2010 10:53 pm

Re: New release of EightyOne available

Post by Fruitcake »

Reboot wrote: Thu May 11, 2023 7:56 am I noticed there is a memotech HRG emulation edge fail case that only occurs when NTSC=1 (60Hz checkbox).
The attached file is best run at speed32.
Thanks for the file. I was able to reproduce the issue and have a fix lined up for inclusion in the next release.
Fruitcake
Posts: 340
Joined: Wed Sep 01, 2010 10:53 pm

Re: New release of EightyOne available

Post by Fruitcake »

Spezzi63 wrote: Sun May 07, 2023 6:07 pm
Fruitcake wrote: Tue May 02, 2023 12:09 am Version 1.37 has just been released and is available from here.
Hello,
A quick question, about my small problem:
My tests with Eightyone have shown that only after using the
Eightyone version e.g. "V0.43b" or "V0.52" even in the latest "Version 1.37",
the 8-bit Volume are recognized (connected to USB) .
About <drives-HD0> can not be selected or reselected in version 1.37 ?
Can anyone else confirm this behavior of Eightyone ?
If it were so, it could have been from version 0.52 at Eightyone,
that the possibility of the permanent selection of the connected 8-bit Volume, was simply forgotten?
Many greetings,
Günter
Sorry, I don't understand what the problem is here. Can you provide details on how to reproduce it?
Spezzi63
Posts: 5
Joined: Sun May 07, 2023 10:22 am

Re: New release of EightyOne available

Post by Spezzi63 »

Fruitcake wrote: Sat May 13, 2023 12:49 am Sorry, I don't understand what the problem is here. Can you provide details on how to reproduce it?
I hope I can explain it "simply" ;)
With "v1.37", a connected USB device (Simple 8-bit Data storage) will not be activated via the selection.
But this procedure works with "V0.43b" or "V0.52".
GIF EightyOne drives.gif
Fruitcake
Posts: 340
Joined: Wed Sep 01, 2010 10:53 pm

Re: New release of EightyOne available

Post by Fruitcake »

Thanks. I have followed your steps with v0.52, v1.0 and v1.0a and it seems the functionality was broken way back in v1.0 (10th March 2008!)...
Spezzi63
Posts: 5
Joined: Sun May 07, 2023 10:22 am

Re: New release of EightyOne available

Post by Spezzi63 »

Fruitcake wrote: Sat May 13, 2023 1:52 pm Thanks. I have followed your steps with v0.52, v1.0 and v1.0a and it seems the functionality was broken way back in v1.0 (10th March 2008!)...
Thank you, for allowing a review to take place in such a short time.
I think Eightyone is the unique emulator that supports this feature.
Fruitcake
Posts: 340
Joined: Wed Sep 01, 2010 10:53 pm

Re: New release of EightyOne available

Post by Fruitcake »

Spezzi63 wrote: Sat May 13, 2023 10:47 am With "v1.37", a connected USB device (Simple 8-bit Data storage) will not be activated via the selection.
But this procedure works with "V0.43b" or "V0.52".
I found a change from v0.52 to v1.0 which I think was the cause, and it now seems to work. I have not exhausted tested the drive functionality (I am not that familiar with it), but it now allows selection of the drive as v0.52 used to. Version 1.38 has just been released. Please download it and give it a try.
Fruitcake
Posts: 340
Joined: Wed Sep 01, 2010 10:53 pm

Re: New release of EightyOne available

Post by Fruitcake »

Reboot wrote: Thu May 11, 2023 7:56 am I noticed there is a memotech HRG emulation edge fail case that only occurs when NTSC=1 (60Hz checkbox).
This should now be fixed in the newly released v1.38!
Elurdio
Posts: 19
Joined: Thu Apr 28, 2022 3:44 pm

Re: New release of EightyOne available

Post by Elurdio »

Hi,

I'm using the Jupiter Ace emulation with 51 k of RAM

When using the option to load a file in memory (file->load memory block) if it goes wrong.
Fruitcake
Posts: 340
Joined: Wed Sep 01, 2010 10:53 pm

Re: New release of EightyOne available

Post by Fruitcake »

When you say "goes wrong", in what way does it go wrong? I just tried loading a 2K block to address 50000 and it seemed to work fine. Could you provide the step-by-step instructions of the problem that I can follow to reproduce the issue you are seeing.
Elurdio
Posts: 19
Joined: Thu Apr 28, 2022 3:44 pm

Re: New release of EightyOne available

Post by Elurdio »

Fruitcake wrote: Mon May 29, 2023 12:48 pm When you say "goes wrong", in what way does it go wrong? I just tried loading a 2K block to address 50000 and it seemed to work fine. Could you provide the step-by-step instructions of the problem that I can follow to reproduce the issue you are seeing.
I just was going to delete my post ....

I have tried older versions and the problem persist. And I'm sure that with those older versions there was no problem, so it seems is a problem with my system, not from Eigthyone.

Sorry,
Post Reply