That's a lot of k.... works out to around 14.5 Mb i reckon that probably enough memory to run a small nuclear power plant
New release of EightyOne available
Re: New release of EightyOne available
what's that Smell.... smells like fresh flux and solder fumes...
Re: New release of EightyOne available
Re: New release of EightyOne available
as some may know by now i am working with UDG right now, and i am quite far in writing a UDG designer up to now most of the testing has been on real hardware but i did run across a bug that required further investigation and so fire up eightyone 1.5 only to discover that quicksilva graphics mode seems to be totally borked....
regards Andy
regards Andy
what's that Smell.... smells like fresh flux and solder fumes...
Re: New release of EightyOne available
How borked? QS mode has a switch in the menu, to enable it. It's enabled by default but I don't know how the various hardware switches interact. Perhaps you only need a 16k rampack selected, though ZXpand overrides the RAMpack settings. It was working for me when I last looked. Please post a repro scenario.
More info from NO$:
"
QuickSilva QS CHRS board
Maps 1K RAM to 8400h-87FFh, allows to define and display 128 characters (64 normal, and, independently thereof, 64 inverted characters) (for example, the inverse ones can be assigned as lowercase letters).
On power-up, the RAM is uninitialized, so garbage would be displayed. Quicksilva has "solved" this problem by providing a mechanical switch, where the user can (must) manually enable/disable the CHRS feature (there is no I/O port to do this by software). Moreover, the board has 4 DIP switches, presumably for adjusting HSYNC or so (should be all off for ZX81 in SLOW mode, or switch 3,4 on for ZX80 and ZX81 in FAST mode) (whereas "FAST" mode is probably meant to mean PAUSE/INPUT, accordingly software should avoid to switch between SLOW mode and PAUSE/INPUT).
Depending on the invert bit, the first or second 512 bytes are mirrored to 1E00h on ULA access (however, the CPU is still able to read ROM from 1E00h; though, eventually, ROM-reading MIGHT work only when the enable switch is off?)
"
More info from NO$:
"
QuickSilva QS CHRS board
Maps 1K RAM to 8400h-87FFh, allows to define and display 128 characters (64 normal, and, independently thereof, 64 inverted characters) (for example, the inverse ones can be assigned as lowercase letters).
On power-up, the RAM is uninitialized, so garbage would be displayed. Quicksilva has "solved" this problem by providing a mechanical switch, where the user can (must) manually enable/disable the CHRS feature (there is no I/O port to do this by software). Moreover, the board has 4 DIP switches, presumably for adjusting HSYNC or so (should be all off for ZX81 in SLOW mode, or switch 3,4 on for ZX80 and ZX81 in FAST mode) (whereas "FAST" mode is probably meant to mean PAUSE/INPUT, accordingly software should avoid to switch between SLOW mode and PAUSE/INPUT).
Depending on the invert bit, the first or second 512 bytes are mirrored to 1E00h on ULA access (however, the CPU is still able to read ROM from 1E00h; though, eventually, ROM-reading MIGHT work only when the enable switch is off?)
"
Re: New release of EightyOne available
Switch... menu...
I'll go look.for it...
And report back
Thank you SirMorris
Andy
I'll go look.for it...
And report back
Thank you SirMorris
Andy
what's that Smell.... smells like fresh flux and solder fumes...
Re: New release of EightyOne available
Ah right... my mistake then....
Thanks for the help
Regards Andy
Thanks for the help
Regards Andy
what's that Smell.... smells like fresh flux and solder fumes...
Re: New release of EightyOne available
I just found this new 1.5 version of Eighty one. When I first started it from my desktop (win10) it could not find the rom. I found the rom for ZX81 1 and 2 as well as ZXPand. When I select ZX81 roms 1 or 2 It works but if I choose the ZXPand rom, it's a hi-res scrambled mess on the screen.
Is there help on configuring and setting this up as its been a while (last version was 1 for eighty one)?
Tim
Is there help on configuring and setting this up as its been a while (last version was 1 for eighty one)?
Tim
- Attachments
-
- Capture2.JPG (61.63 KiB) Viewed 4574 times
-
- Capture.JPG (106.05 KiB) Viewed 4576 times
Re: New release of EightyOne available
When updating EightyOne versions, it is worthwhile deleting its configuration file before running the new version.
On Windows 7 the configuration file can be found in this folder:
C:\Users\{username}\AppData\Roaming\EightyOne\EightyOne.ini
where {username} is your Windows user account name.
I'm not sure what the path is on Windows 10 but it is probably the same. The AppData folder will be hidden by default and so you won't be able to browse to it, but you can type the path into Windows Explorer and it will directly open the folder.
On Windows 7 the configuration file can be found in this folder:
C:\Users\{username}\AppData\Roaming\EightyOne\EightyOne.ini
where {username} is your Windows user account name.
I'm not sure what the path is on Windows 10 but it is probably the same. The AppData folder will be hidden by default and so you won't be able to browse to it, but you can type the path into Windows Explorer and it will directly open the folder.
- 1024MAK
- Posts: 5302
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: New release of EightyOne available
The ZXpand ROM is what is known as a overlay ROM. It will not work correctly when placed "inside" the ZX81/TS1000 because it does not contain any character bit patterns. Hence the mess on the screen when you select it!
Mark
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer being good this year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer being good this year.
Re: New release of EightyOne available
^ What Mark said
Use the regular ROM and the zxpand stuff takes care of itself. It's not obvious, I'll admit, so maybe I should protect against that in the emulator code.
All you need for ZXpand support is to select the option in the menu. Maybe I'll set the ROMs accordingly and override the settings when you check the box.
Use the regular ROM and the zxpand stuff takes care of itself. It's not obvious, I'll admit, so maybe I should protect against that in the emulator code.
All you need for ZXpand support is to select the option in the menu. Maybe I'll set the ROMs accordingly and override the settings when you check the box.