Page 2 of 4

Re: Which emulator and assembler for the Mac?

Posted: Fri Nov 17, 2017 10:24 am
by BarryN
Check out this emulator also, it is a fully native Mac application, not a wine bottle:

viewtopic.php?f=3&t=2650

Re: Which emulator and assembler for the Mac?

Posted: Fri Nov 17, 2017 10:26 am
by sirmorris
BarryN wrote: Fri Nov 17, 2017 10:16 am To find the ZXpand_SD_Card folder look for a folder with a path like this: ..[snip].. When a wine bottle is first run, it copies the application to a virtual C drive path like the one above.

Thanks!

Re: Which emulator and assembler for the Mac?

Posted: Fri Nov 24, 2017 7:46 am
by BarryN
I have posted a newer Mac bottle of the EightyOne emulator at: https://drive.google.com/open?id=0B8RnV ... 0xHYWVJcWc

This package includes tools to give you easy access to some of the folders including the ZXpand SD Card folder. See screenshots below...
Screen Shot 2017-11-24 at 1.42.21 AM.png
Screen Shot 2017-11-24 at 1.42.21 AM.png (114.7 KiB) Viewed 6877 times
Screen Shot 2017-11-24 at 1.43.14 AM.png
Screen Shot 2017-11-24 at 1.43.14 AM.png (81.38 KiB) Viewed 6877 times

Re: Which emulator and assembler for the Mac?

Posted: Fri Nov 24, 2017 9:08 am
by sirmorris
Thanks! I appreciate this very much. It's made development of ... the thing I'm doing ... a little easier!

Re: Which emulator and assembler for the Mac?

Posted: Fri Nov 24, 2017 1:55 pm
by BarryN
sirmorris wrote: Fri Nov 24, 2017 9:08 am Thanks! I appreciate this very much. It's made development of ... the thing I'm doing ... a little easier!
Your welcome. I noticed that in a demonstration video for the ZXpand there was a program used named "MEM.P" that showed the memory configuration. Any idea where I could get that?

Re: Which emulator and assembler for the Mac?

Posted: Fri Nov 24, 2017 4:42 pm
by sirmorris
Here. It's a bit cheap. And because of mirroring excuses it reports RAM above 48k. So don't trust it.

Re: Which emulator and assembler for the Mac?

Posted: Fri Nov 24, 2017 7:59 pm
by BarryN
Thanks! It looks like it was written in a C IDE? You don't happen to have the source code and know which IDE do you?

Re: Which emulator and assembler for the Mac?

Posted: Tue Nov 28, 2017 4:48 pm
by Paul
I have problems starting these version on my MacBook Pro with Sierra :oops:
After unzipping I copied it into the Program folder.
Starting it said it wasn't authorized so I started the scurity sessions and allowed opening the file.
I had to repeat this for the SD-Card folder icon (and the others) as well.
When I start eo it is checked by security and it asked me if i would like to open it (downloaded from internet). I answered yes and Eo icon appeard in the dock and disappeared a few seconds later.
now every time i doubleclick it the dock will show the icon for aprox. half a second and nothing happens.
if I try the SDCARD folder it tells me folder doesn't exist, I have to run eo first :(
What am I doing wrong?
How can I reset the made decisions and start a new try?
Kind regards
Paul

Re: Which emulator and assembler for the Mac?

Posted: Tue Nov 28, 2017 5:19 pm
by PokeMon
Have you WINE installed ?
For me it's working on Mac with latest El Capitan.
I am impressed how EightyOne did develope itself - maybe my previous version is several years old. :mrgreen:

I wonder what the folder apps are created for.
At least one folder app would be sufficient to navigate.
But this is maybe a matter of choice ...

Re: Which emulator and assembler for the Mac?

Posted: Tue Nov 28, 2017 5:31 pm
by Paul
No wine installed on my Mac.
I thought it was self contained?
I'm going to install wine and try again.
Kind regards Paul