I'm trying to figure out how to load ZX80 software from a TZXduino. My ZX80 works perfectly, including Paul Farrow's Kong and Pacman tape via cassette player, plus small basic stuff i can save and load. I can't seem to figure out how to get the .o files from the player to the machine. It say 'playing' but no % counter or signal to ZX80.
Any help would be appreciated. Plus I know I posted in hardware thread.
Dave
ZX80 games and loading.
-
- Posts: 79
- Joined: Tue Aug 04, 2020 6:26 pm
ZX80 games and loading.
ZX80 (white psu)
Issue 1 ZX81
32k comp mod ZX81 filesixty keyboard
Issue 1 Spectrum
Issue 2 Specrum
Toastrack
Issue 3 in Lo-Profile keyboard
Harlequin 128
DivMMC future
vdrive
TZXduino
ZX printer
Alphacom printer
Issue 1 ZX81
32k comp mod ZX81 filesixty keyboard
Issue 1 Spectrum
Issue 2 Specrum
Toastrack
Issue 3 in Lo-Profile keyboard
Harlequin 128
DivMMC future
vdrive
TZXduino
ZX printer
Alphacom printer
Re: ZX80 games and loading.
Did you try to clean the connectors or verify that a signal is present on the PCB? I had an intermittent power connector and after replacing it, it was fine. For a first try I use DeOxit contact cleaner. Also verify that the cables are working.