ZX80 games and loading.

General games-related topics
Post Reply
Its1982again
Posts: 78
Joined: Tue Aug 04, 2020 6:26 pm

ZX80 games and loading.

Post by Its1982again »

I'm trying to figure out how to load ZX80 software from a TZXduino. My ZX80 works perfectly, including Paul Farrow's Kong and Pacman tape via cassette player, plus small basic stuff i can save and load. I can't seem to figure out how to get the .o files from the player to the machine. It say 'playing' but no % counter or signal to ZX80.

Any help would be appreciated. Plus I know I posted in hardware thread.

Dave
ZX80 (white psu)
Issue 1 ZX81
32k comp mod ZX81 filesixty keyboard
Issue 1 Spectrum
Issue 2 Specrum
Toastrack
Issue 3 in Lo-Profile keyboard
Harlequin 128
DivMMC future
vdrive
TZXduino
ZX printer
Alphacom printer
PaulUK
Posts: 8
Joined: Wed Jun 29, 2022 12:10 pm

Re: ZX80 games and loading.

Post by PaulUK »

Did you try to clean the connectors or verify that a signal is present on the PCB? I had an intermittent power connector and after replacing it, it was fine. For a first try I use DeOxit contact cleaner. Also verify that the cables are working.
Post Reply