Ball Blaster

General games-related topics
User avatar
zx81jens
Posts: 182
Joined: Sat May 10, 2008 8:26 am
Location: a Basement in Nienburg / Germany

Re: Ball Blaster

Post by zx81jens » Thu Mar 08, 2018 6:35 pm

The Download did not work :-(

:cry:
eyerything will be okay in the end.
if it´s not okay, it´s not the end.

and: uıɐbɐ ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ɹǝʌǝ ɹǝʌǝu ןןıʍ ı

User avatar
sirmorris
Posts: 2821
Joined: Thu May 08, 2008 5:45 pm
Location: oxon, uk

Re: Ball Blaster

Post by sirmorris » Thu Mar 08, 2018 7:43 pm

In the original post? Yes I know - that's why I re-uploaded it to the software section.
--=== ZXpand+ ... A more moderner all-in-one upgrade solution for ZX81 ===--
* SD/MMC storage * 32K Hires-capable RAM * AY sound chip * Joystick port * Serial *
* BASIC enhancements - plug & play * Reset button * Auto-boot facility *

User avatar
zx81jens
Posts: 182
Joined: Sat May 10, 2008 8:26 am
Location: a Basement in Nienburg / Germany

Re: Ball Blaster

Post by zx81jens » Fri Mar 09, 2018 7:30 am

Got it :roll:

Thanx, Charlie :)
eyerything will be okay in the end.
if it´s not okay, it´s not the end.

and: uıɐbɐ ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ɹǝʌǝ ɹǝʌǝu ןןıʍ ı

User avatar
RobertK
Posts: 33
Joined: Tue Dec 19, 2017 4:29 pm
Location: Vienna

Re: Ball Blaster

Post by RobertK » Fri Mar 09, 2018 11:32 pm

sirmorris wrote:
Thu Mar 08, 2018 4:30 pm
I should check before I speak :S
The version posted was for ZXpand, and uses its features quite extensively.
Ah, with ZXpand enabled in the EightyOne emu it works. You should add that info to the annoncement thread.
A great game!

User avatar
sirmorris
Posts: 2821
Joined: Thu May 08, 2008 5:45 pm
Location: oxon, uk

Re: Ball Blaster

Post by sirmorris » Sun Mar 11, 2018 10:25 am

I've updated the binary so ZXpand is now detected so it will work on machines without it enabled.
--=== ZXpand+ ... A more moderner all-in-one upgrade solution for ZX81 ===--
* SD/MMC storage * 32K Hires-capable RAM * AY sound chip * Joystick port * Serial *
* BASIC enhancements - plug & play * Reset button * Auto-boot facility *

Post Reply