AY Extended BASIC
AY Extended BASIC
Wasn't sure if I should put this here or in the Software forum. I've been working on this for awhile now.
Originated from this article...
SOUND FOR THE ZX81
R. Bruneaus, Sept. 1994
Sinc-Link Vol. 12 No. 4
Modified for use with ZXPAND+.
Includes demos, a couple simple games and tunes.
I've tested all programs on a T/S 1000 with a ZXPand+ interface.
PAL systems will naturally RUN faster.
Regards;
Greg
Originated from this article...
SOUND FOR THE ZX81
R. Bruneaus, Sept. 1994
Sinc-Link Vol. 12 No. 4
Modified for use with ZXPAND+.
Includes demos, a couple simple games and tunes.
I've tested all programs on a T/S 1000 with a ZXPand+ interface.
PAL systems will naturally RUN faster.
Regards;
Greg
- Attachments
-
- AYBASIC.zip
- Programs, demos, games and docs
- (448.16 KiB) Downloaded 337 times
Re: AY Extended BASIC
This looks very interesting - thanks Greg! Sound programs are thin on the ground ... for now
Re: AY Extended BASIC
THANK YOU THANK YOU THANK YOU........................
Re: AY Extended BASIC
Great stuff indeed, excellent work as usual, thank you very much .
Andy
Andy
what's that Smell.... smells like fresh flux and solder fumes...
Re: AY Extended BASIC
Greg,
Just curious about what tool you use to convert from .BAS to .P?
Tim
Just curious about what tool you use to convert from .BAS to .P?
Tim
Re: AY Extended BASIC
So, both emulators will do it automagically?
I use zxtext2p to convert .bas to .p and these use sz81 for emulation. The format of the .bas files for AY Basic are not in a format that zxtext2p uses and I was thinking there was another utility.
Tim
I use zxtext2p to convert .bas to .p and these use sz81 for emulation. The format of the .bas files for AY Basic are not in a format that zxtext2p uses and I was thinking there was another utility.
Tim
Re: AY Extended BASIC
In VB81 Xur...
To LOAD a .bas file, under FILE options just select the .bas file (any plain text file works), it will load.
To save as .p file just SAVE "MyProg"
To load a .p file, under FILE options just select the .p file (tzx also works), it will load.
To save as .txt file just SAVE "MyProg.txt"
I replace the extension with .bas.
See also...
http://www.emutopia.com/index.php/emula ... 9-vb81-xur