JOY81 - Programmable Joystick Interface for ZX81
Re: JOY81 - Programmable Joystick Interface for ZX81
I would also like to take two interfaces. Best for me would be if they were completely finished - including programmed GAL's (I'am no so good at soldering). If that's too much work or it's better to send it
unsolderd to Germany than I can find someone here for soldering.
unsolderd to Germany than I can find someone here for soldering.
My Blog (in German): http://www.jungsi.de
Re: JOY81 - Programmable Joystick Interface for ZX81
Hi kmurta,
I would like to buy 2 (one more than I wrote before) boards - pcb and parts (incl. pre-programmed GAL) if possible.
Mathias
I would like to buy 2 (one more than I wrote before) boards - pcb and parts (incl. pre-programmed GAL) if possible.
Mathias
Mathias
ZX-Team member and classic computer collector
ZX-Team member and classic computer collector
Re: JOY81 - Programmable Joystick Interface for ZX81
I don't know how many boards you have or can deliver now - remember I was the first one asked.
Re: JOY81 - Programmable Joystick Interface for ZX81
If you don't have enough boards I wouldn't mind having a batch produced here in Germany in case you would send me the board files (and even transfer you a fee per sold board)
It's up to you.
Kind regards
Paul
It's up to you.
Kind regards
Paul
In theory, there is no difference between theory and practice. But, in practice, there is.
Re: JOY81 - Programmable Joystick Interface for ZX81
Greetings from France,
I'm also interested in the JOY81. I can solder so I only need a kit (board, components, connectors, ...).
Just let me know how much to ship to my country.
Keep up the good work !
BTW, I already bought many ICs from G&C Supermarket on eBay. Always a five star service.
I'm also interested in the JOY81. I can solder so I only need a kit (board, components, connectors, ...).
Just let me know how much to ship to my country.
Keep up the good work !
BTW, I already bought many ICs from G&C Supermarket on eBay. Always a five star service.
Antony
Re: JOY81 - Programmable Joystick Interface for ZX81
Hello to all!
Do not worry, I believe there are enough boards for everyone (30 pcb's) and parts enough to mount at least 10 interfaces. But there are a restriction with the piggyback pcb's, for which I only have 10 units.
Until the moment I have registered the following intentions:
PokeMon - 1 mounted JOY81 ?
tdg8934 - 1 mounted JOY81 ?
msch - 2 pcb + full parts
1024MAK - 1 pcb + programmed GALs
Paul - 2 pcb
siggi - 2 pcb
Jungsi - 2 mounted JOY81
amauget - 1 pcb + full parts
So, according to these varied intentions placed here I give you four options:
If you are in agreement with these conditions, I will accept orders during the week with possible shipments from November 11. Please, contact me in PVT at kmurta@yahoo.com.br and confirm which set you want, informing too the postal address for shipment. Payments via Paypal to kmurta@yahoo.com.br.
I'm open to any questions or suggestions.
Thanks,
Kelly Murta
Do not worry, I believe there are enough boards for everyone (30 pcb's) and parts enough to mount at least 10 interfaces. But there are a restriction with the piggyback pcb's, for which I only have 10 units.
Until the moment I have registered the following intentions:
PokeMon - 1 mounted JOY81 ?
tdg8934 - 1 mounted JOY81 ?
msch - 2 pcb + full parts
1024MAK - 1 pcb + programmed GALs
Paul - 2 pcb
siggi - 2 pcb
Jungsi - 2 mounted JOY81
amauget - 1 pcb + full parts
So, according to these varied intentions placed here I give you four options:
- Set 1 - (JOY81 pcb + piggyback pcb) - 7.50 EUR
Set 2 - (JOY81 pcb + piggyback pcb + programmed GALs) - 11.00 EUR
Set 3 - (JOY81 pcb + piggyback pcb + full parts) - 18.00 EUR
Set 4 - (JOY81 mounted) - 23.00 EUR
If you are in agreement with these conditions, I will accept orders during the week with possible shipments from November 11. Please, contact me in PVT at kmurta@yahoo.com.br and confirm which set you want, informing too the postal address for shipment. Payments via Paypal to kmurta@yahoo.com.br.
I'm open to any questions or suggestions.
Thanks,
Kelly Murta
1 x ZX81, 2 x TK85 , 1 TK82C, 1 TK95, 1 x Alphacom 32 printer, 1 x ZXpand
ZeXtender board, Joy81 - Programmable Joystick Controller, Turbo Sound 81
http://zx81.eu5.org
https://toddysoftware.itch.io/
ZeXtender board, Joy81 - Programmable Joystick Controller, Turbo Sound 81
http://zx81.eu5.org
https://toddysoftware.itch.io/
Re: JOY81 - Programmable Joystick Interface for ZX81
For anyone who is in doubt, this is the piggyback pcb:
If you don't need it (because you already have one), tell me in your order and discount 1.40 EUR from price of sets 1, 2 and 3.
If you don't need it (because you already have one), tell me in your order and discount 1.40 EUR from price of sets 1, 2 and 3.
1 x ZX81, 2 x TK85 , 1 TK82C, 1 TK95, 1 x Alphacom 32 printer, 1 x ZXpand
ZeXtender board, Joy81 - Programmable Joystick Controller, Turbo Sound 81
http://zx81.eu5.org
https://toddysoftware.itch.io/
ZeXtender board, Joy81 - Programmable Joystick Controller, Turbo Sound 81
http://zx81.eu5.org
https://toddysoftware.itch.io/
Re: JOY81 - Programmable Joystick Interface for ZX81
Okay - ordered and already payed.
Set 4 - (JOY81 mounted) - 23.00 EUR
Set 4 - (JOY81 mounted) - 23.00 EUR
Re: JOY81 - Programmable Joystick Interface for ZX81
Money sent.
There was a warning you might refuse the payment because you don't have an account in this euro.
Maybe you give prices in your own currency?
Kind regards
Paul
There was a warning you might refuse the payment because you don't have an account in this euro.
Maybe you give prices in your own currency?
Kind regards
Paul
In theory, there is no difference between theory and practice. But, in practice, there is.
Re: JOY81 - Programmable Joystick Interface for ZX81
Hi kmurta,
what is the price for JOY81 pcb + full parts - without the piggyback pcb?
Edit: forget my question!
I don't need it because I got this:
Sorry for the circumstances...
Mathias
what is the price for JOY81 pcb + full parts - without the piggyback pcb?
Edit: forget my question!
I don't need it because I got this:
Sorry for the circumstances...
Mathias
Last edited by msch on Mon Nov 04, 2013 1:17 pm, edited 1 time in total.
Mathias
ZX-Team member and classic computer collector
ZX-Team member and classic computer collector