Replecemant case ZX80

Any discussions related to the creation of new hardware or software for the ZX80 or ZX81
Post Reply
markus_8008
Posts: 1
Joined: Thu Nov 13, 2014 12:39 pm

Replecemant case ZX80

Post by markus_8008 »

To all who are interested in replacement cases for the ZX80.
Here are a few files.
http://www.chiaroscuro.at/Daten/ZX80/3K_Pack_2.pdf
http://www.chiaroscuro.at/Daten/ZX80/3K_Pack_2.zip
http://www.chiaroscuro.at/Daten/ZX80/ZX80_Oben_5.pdf
http://www.chiaroscuro.at/Daten/ZX80/ZX80_Oben_5.zip
http://www.chiaroscuro.at/Daten/ZX80/ZX80_Unten_6.pdf
http://www.chiaroscuro.at/Daten/ZX80/ZX80_Unten_6.zip
The pdf files are 3D. In the zip files there are the formats STL, STEP214 and IGES.

If you want it ready to use, please take a look at my shapways shop.

http://www.shapeways.com/shops/markus_8008

All parts are already made at shapeways, so they work. If you get warped ones you can ask for a rerun. It is possible to get them straight.

Markus
Top
Post Reply

Return to “Development”