Page 1 of 2
ZX PRINTER driver for ZEDIT
Posted: Fri Aug 10, 2018 12:35 pm
by stefano
This driver is for ZEDIT, an UNICODE text editor for the 48K ZX81 with 48K RAM.
To use the driver you need to load the text in memory (32K could suffice), then load and run the driver.
- zedprint.p
- max 50 columns printer driver for UNICODE text @32768
- (4.02 KiB) Downloaded 391 times
Pictures are appreciated, (GP50S, ZX PRINTER, Alphacom or whatever variant you have !)
- sample
- MANUAL.gif (3.98 KiB) Viewed 6718 times
Re: ZX PRINTER driver for ZEDIT
Posted: Fri Aug 10, 2018 2:03 pm
by siggi
Re: ZX PRINTER driver for ZEDIT
Posted: Fri Aug 10, 2018 2:25 pm
by 1024MAK
Thanks for the link
Mark
Re: ZX PRINTER driver for ZEDIT
Posted: Fri Aug 10, 2018 2:40 pm
by stefano
- lp.c
- ZEDPRINT, main program file. Be aware that most of the engine is part of z88dk, to be "prepared" in a special way.
- (2.24 KiB) Downloaded 376 times
Re: ZX PRINTER driver for ZEDIT
Posted: Fri Aug 10, 2018 6:33 pm
by msch
great job!
Re: ZX PRINTER driver for ZEDIT
Posted: Sat Aug 11, 2018 12:11 am
by stefano
thankyou, I have a slightly improved version, coming soon, with the correct triangular symbols for arrows. I'd like to patch everything and get variant for other 'language localizations', e.g. French, Italian, Spanish. .
Re: ZX PRINTER driver for ZEDIT
Posted: Sat Aug 11, 2018 11:07 am
by siggi
stefano wrote: ↑Fri Aug 10, 2018 12:35 pm
Pictures are appreciated, (GP50S, ZX PRINTER, Alphacom or whatever variant you have !)
Here a picture of a printout using Alphacom 32:
One graphic character sees to be missing: the inverted full square:
Siggi
Re: ZX PRINTER driver for ZEDIT
Posted: Sat Aug 11, 2018 12:00 pm
by siggi
Re: ZX PRINTER driver for ZEDIT
Posted: Sat Aug 11, 2018 12:09 pm
by siggi
There are also some differences in 'Ää' mode (printed as 'äÄ' mode! upercase/LOWERCASE!) and in the 'Ää'+SHIFT mode
Re: ZX PRINTER driver for ZEDIT
Posted: Sat Aug 11, 2018 12:19 pm
by siggi
Here are also some differences visible: