TZXDuino and CasDuino firmware combined?

Any discussions related to the creation of new hardware or software for the ZX80 or ZX81
Post Reply
repetto74
Posts: 69
Joined: Tue Dec 20, 2016 8:46 pm

TZXDuino and CasDuino firmware combined?

Post by repetto74 »

Hi Guys,

I have a TZXDuino/CasDuino reader which require of course a firmware to be flashed whenever you want to use it as a TZXDuino or a CASDuino. I heard about a kind of MAXDuino which will merge both firmwares and no need to flash anymore. Is that working? I tried to flash it but I cannot get it flashed properly on my Arduino hardware. Does it require a dedicated hardware to work?
:?: :?: :?:
rcmolina
Posts: 19
Joined: Mon Jul 13, 2020 6:52 pm

Re: TZXDuino and CasDuino firmware combined?

Post by rcmolina »

No, you don't new hardware. Maxduino default userconfig.h fits in your old tzxduino hardware, but remember to change screen from oled to lcd if needed. Easy, just the same procedure also you used with your tzxduino firmware.

Hope this post clarify and close the question.

Ps. If you don't upgrade anymore, you'll loose new features, up to you :D
Post Reply