Page 2 of 6
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Sun Jan 27, 2019 11:36 am
by Kai
Hi Didier,
good to know you're here
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Sun Jan 27, 2019 7:19 pm
by didier
hello kai , hello mark , hello rwap ...
I made a blog 8 years ago ... but it is not up to date ... I hope to update it quickly ...
at the time, I made an article on my floppy disk mageco ... the article is not finished ....
but, it will give you an idea of how the floppy disk works ...
I have two floppy disk mageco .... and one of the interfaces has additional functions in its menu compared to the first interface ...
here is the blog :
http://zx81.over-blog.com/
thank you (excuse me for my english ... i m french)
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Sun Jan 27, 2019 7:55 pm
by RWAP
Thanks Didier - I didn't realise it was you on those other forums
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Mon Jan 28, 2019 7:49 pm
by didier
hello rwap !
did you want information about floppy disk mageco?
at the electronic level I'm not at all specialiste, it's kai who had repaired the floppy disk a few years ago ...
I have two floppy disk with two interfaces ..
the system works like this:
first there is an interface to connect to the zx81 (in this interface there is a rom that manages the menu
then a cable joins an interface that is connected to the floppy disk ...
the system works very well ...
but I think it could be improved (with some good technicians)
bye bye rwap
didier
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Mon Jan 28, 2019 8:25 pm
by Kai
It is interesting that the mageco IF works without any controller chip. Only done with LS logic.
As I had tested it worked very stable and not even slow.
But the DOS is some special kind you have to get used to first.
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Tue Jan 29, 2019 9:15 pm
by RWAP
I did wonder if there was an English manual for it = but only out of interest - I have never owned one!
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Wed Jan 30, 2019 12:10 am
by gammaray
I have an interest in seeing the PCB and the chips!
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Wed Jan 30, 2019 1:38 am
by makeit2day
I would be interested too and a wiring diagram.
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Wed Jan 30, 2019 2:40 am
by mrtinb
makeit2day wrote: ↑Wed Jan 30, 2019 1:38 am
I would be interested too and a wiring diagram.
As mentioned previously in this thread, the diagram is here:
http://zx81.ordi5.free.fr/vtr/download/ ... er.sch.pdf
There is also the French manual:
http://zx81.ordi5.free.fr/vtr/download/DOC_floppy1.pdf
Re: "Mageco" disk controler. [infos, Docs wanted]
Posted: Wed Jan 30, 2019 2:46 am
by makeit2day
Thanks