ZEDDYNET

Discussions about Sinclair ZX80 and ZX81 Hardware
User avatar
1024MAK
Posts: 2240
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: ZEDDYNET

Post by 1024MAK » Sun Jan 03, 2016 3:52 am

Thank you Tim :D 8-)

Mark

User avatar
Paul
Posts: 991
Joined: Thu May 27, 2010 8:15 am
Location: Germanys west end

Re: ZEDDYNET

Post by Paul » Fri Jan 08, 2016 6:26 am

I now also have five wiznet modules for sale.
These are 20£ each without postage. When sent together with other item no extra postage.
kind regards Paul
In theory, there is no difference between theory and practice. But, in practice, there is.

User avatar
Paul
Posts: 991
Joined: Thu May 27, 2010 8:15 am
Location: Germanys west end

Re: ZEDDYNET

Post by Paul » Sat Jan 30, 2016 7:05 am

Because people keep asking me where software for Zeddynet can be found:
it's in our german forum http://forum.tlienhard.com/phpBB3/viewt ... f=2&t=1616
This thread is intended to be READONLY, please don't answer there. It's for fast finding of all programs and sources.
Please try a translation tool if you have difficulties reading german.
I didn't make a british copy because I am afraid I will miss updates. But there isn't much read, mainly download links ;)
Kind regards
Paul
In theory, there is no difference between theory and practice. But, in practice, there is.

User avatar
Paul
Posts: 991
Joined: Thu May 27, 2010 8:15 am
Location: Germanys west end

Re: ZEDDYNET

Post by Paul » Sat Jan 30, 2016 9:49 am

Edit: prices recalculated in €.

Just to keep you informed, here are the available options for the Hardware:

A) PCB only plus programmed GAL without WIZ812MJ module: 13€ including postage
A1) PCB only plus programmed GAL plus WIZ812MJ module: 40€ including postage
B) Kit without WIZ812MJ module 25€ including postage
B1) Kit plus WIZ812MJ module 52€ including postage
the Kit contains all neccessary parts including what is needed for Pokemon 81xtender.
C) Soldered and tested 34€ including postage. It excludes the WIZ812MJ module.
C1) Soldered and tested including WIZ812MJ module 60€ including postage.

Please be aware that only limited supply of WIZ812MJ are available from me.

In any way you will need a WIZ812MJ module as well.
Just as an example it's available at TME,Mouser etc.
Last edited by Paul on Sat Jul 02, 2016 10:30 am, edited 1 time in total.
In theory, there is no difference between theory and practice. But, in practice, there is.

User avatar
gammaray
Posts: 586
Joined: Sun Apr 17, 2016 2:44 am
Location: Texas

Re: ZEDDYNET

Post by gammaray » Tue May 10, 2016 4:04 am

Is it too late to get a ZEDDYNET?
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM

User avatar
Paul
Posts: 991
Joined: Thu May 27, 2010 8:15 am
Location: Germanys west end

Re: ZEDDYNET

Post by Paul » Tue May 10, 2016 6:02 am

It's never to late.
I have plenty of boards left, a few ready built or naked or kit.
Just PM me with your order....
In theory, there is no difference between theory and practice. But, in practice, there is.

User avatar
gammaray
Posts: 586
Joined: Sun Apr 17, 2016 2:44 am
Location: Texas

Re: ZEDDYNET

Post by gammaray » Thu May 12, 2016 5:26 am

Paul wrote:It's never to late.
I have plenty of boards left, a few ready built or naked or kit.
Just PM me with your order....
I was afraid of that... now where does my wife hide my money... :cry:
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM

User avatar
ranma_simon
Posts: 22
Joined: Sat Sep 26, 2015 9:53 am

Re: ZEDDYNET

Post by ranma_simon » Sun Jun 05, 2016 12:30 pm

I want it one too ;)

User avatar
gammaray
Posts: 586
Joined: Sun Apr 17, 2016 2:44 am
Location: Texas

Re: ZEDDYNET

Post by gammaray » Tue Jun 07, 2016 3:45 pm

ranma_simon wrote:I want it one too ;)
I believe you can PM Paul...
Paul wrote:Just to keep you informed, here are the available options for the Hardware:

A) PCB only plus programmed GAL without WIZ812MJ module: 10£ including postage
A1) PCB only plus programmed GAL plus WIZ812MJ module: 30£ including postage
B) Kit without WIZ812MJ module 19£ including postage
B1) Kit plus WIZ812MJ module 39£ including postage
the Kit contains all neccessary parts including what is needed for Pokemon 81xtender.
C) Soldered and tested 25,50£ including postage. It excludes the WIZ812MJ module.
C1) Soldered and tested including WIZ812MJ module 45,50£ including postage.

Please be aware that only limited supply of WIZ812MJ are available from me.

In any way you will need a WIZ812MJ module as well.
Just as an example it's available at TME,Mouser etc.
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM

User avatar
Paul
Posts: 991
Joined: Thu May 27, 2010 8:15 am
Location: Germanys west end

Re: ZEDDYNET

Post by Paul » Tue Jun 07, 2016 3:55 pm

He did, but didn't tell me which option he prefers.
In theory, there is no difference between theory and practice. But, in practice, there is.

Post Reply