TS1000 Membranes
TS1000 Membranes
Would there be enough interest in replacement TS1000 keyboard membranes? I have a quote based on getting 50 made - but it would mean end price would be £25 each......
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
Re: TS1000 Membranes
That would be about $31US? Shipped or not?
Is this the entire keyboard assembly with overlay or just the membrane?
Is this the entire keyboard assembly with overlay or just the membrane?
I'd like to say thank you on behalf of the group and ourselves and I hope we've passed the audition.
Re: TS1000 Membranes
Shipping would be extra to these prices. but it is not expensive, as I can send these letter rate (£2.45 to the USA).
They are an entire unit - the same as the existing ZX81 membranes:
http://www.sellmyretro.com/offer/detail ... rd%29-2529
They are an entire unit - the same as the existing ZX81 membranes:
http://www.sellmyretro.com/offer/detail ... rd%29-2529
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
Re: TS1000 Membranes
I have a TS1000 with the ZX81 Membrane and I'm perfectly happy. So I have a TS1000 that "speaks" the proper English . I forget that we Americans speak English with an American accent.
2X Timex Sinclair 1000, ZX81, ZX80Core, 5X 16K Ram Pack, ZXBlast, ZX P file to Ear Input Signal Converter, Elf II
Re: TS1000 Membranes
Sure, I''d buy one.
I'd like to say thank you on behalf of the group and ourselves and I hope we've passed the audition.
Re: TS1000 Membranes
I suppose if I wanted one that is twice the normal size that means it would cost around $1250 for minimal quantity of say 12(based on area of lamination)? $100 each?
Anybody want an enlarged membrane for homebrew cases?
Anybody want an enlarged membrane for homebrew cases?
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
Re: TS1000 Membranes
Hmm - 4 x the surface area - possibly - no idea without asking, but probably less than that (!) - not sure what you would want 12 double sized membranes for...
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
Re: TS1000 Membranes
I would want 1 or 2 hoping others might be interested in using them on their large cases designs.
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
Re: TS1000 Membranes
Is it possible to make a single pattern (2 color) for printing that has two small and one large (or 3 to 1) to make both at same time.
But what about the ribbon?
But considering I am the only one interested this is a intellectual exercise.
Was I was right about the cost...
But what about the ribbon?
But considering I am the only one interested this is a intellectual exercise.
Was I was right about the cost...
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
Re: TS1000 Membranes
Just an update - Tynemouth Software have now produced some overlays which can go over a standard ZX81 membrane in order to create a TS1000 membrane version - see http://www.sellmyretro.com/offer/detail ... rlay-27573
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm