Two questions:
1.) Does anyone know what will get the adhesive from the rubber feet off the plastic case without harming the case?
2.) Does anyone have a source for replacement feet?
ZX81/TS1000 Rubber Feet
ZX81/TS1000 Rubber Feet
I'd like to say thank you on behalf of the group and ourselves and I hope we've passed the audition.
Re: ZX81/TS1000 Rubber Feet
http://www.sellmyretro.com/offer/detail ... r-psu-1965
I removed rest of the glue with a screw driver - scratched it off.
I am not a collector - so no problem for me.
Anyway - you won't see any scratches when the foot is replaced.
I removed rest of the glue with a screw driver - scratched it off.
I am not a collector - so no problem for me.
Anyway - you won't see any scratches when the foot is replaced.
- 1024MAK
- Posts: 5118
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: ZX81/TS1000 Rubber Feet
After pulling off and scraping the old foot off, try IPA solvent cleaner.
See post above.
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
Re: ZX81/TS1000 Rubber Feet
In a pinch, WD40 works too.
Re: ZX81/TS1000 Rubber Feet
Thanks guys.
I'd like to say thank you on behalf of the group and ourselves and I hope we've passed the audition.