and it has a command to copy a file back and forth,,, works great,,,
When you try to load the 15412 or 15412a from the 1541 to the TS1500 it must auto run ,, so you can't save it to tape but you can the old ver 1.1 file and it is my understanding that you need a simple basic prg, to load it to the 28C64 in the ZX1541..
Thanks Again,, for your reply,,,
I pulled out my PC and I have uploaded a .wav file that I found. I can't be 100% sure what version this is for (however It's probably the 8192 entry point), but please give it a try if you like. If it doesn't work, then let me know and I'll see if I can convert the correct .p files to .wav files for you.
- (1.5 MiB) Downloaded 114 times
The file 1541f is the older ver 1.1 ..
- (36.4 KiB) Downloaded 6576 times
I had previously mounted my SD card from my µIEC on my PC and I could see my ZX files (just the names, no file type)...I thought then maybe I could copy a .p file directly to the SD card and wondered if it would work. At the time I assumed it wouldn't so I didn't try, now I want to give it a go...
I converted the two .p files (zx1541.p and zx1541a.p) to wav for you. I hope this helps.
Firstly I wanted to prepare everything for mounting into a suitcase enclosure, and secondly I wanted to try copying a .p file directly to the SD card from my Powerbook, and then see if it ran on the ZX81 from the µIEC...amazingly it worked with no problems at all...it's just too easy.
Now I can fill up my SD cards with lots of goodies.
Also thanks for the ZX15412.p files.. after loading into my TS1500 with the ZX1541 attached with blank 28C64 it loaded in the The EEPROM.. Now it works just fine ,, I like the NEW LOAD feature giving you the ability to list and load.. ver 1.1 didn't have that..