Hehe, I can see "oldschool techno" in Your profile.
I like it too. "James Brown is still alive" heheheh.
Anywayz.
I will point it to one guy who maybe would be able to make such interface basing on the schemes etc. However I will have to wait for my ZX81 to come by post.
Can ZX81 load progs directly from MP3 player?
Re: Can ZX81 load progs directly from MP3 player?
IN NIHILUM REVERTERIS - a big text-adventure game for ZX81: http://tiny.pl/g2m6m
"MONOCHROME" issue 5 - (Spring 2014) free paper/PDF magazine about ZX81: http://tiny.pl/q2m44
ZX81 COMPETITIONS 2007/2009: http://zx81.republika.pl/
"MONOCHROME" issue 5 - (Spring 2014) free paper/PDF magazine about ZX81: http://tiny.pl/q2m44
ZX81 COMPETITIONS 2007/2009: http://zx81.republika.pl/
Re: Can ZX81 load progs directly from MP3 player?
A Question for SirMorris.
Re. MMC interface.
To Clarify a few things if you please.
1. I need 3 bits latched output + 1 bit input I/O capability on my ZX81 to work with MMC interface ?
2. The code can be assembled to work in the 8-16K region (assuming Ram is fitted?)
3. Could i ask where you sourced your MMC sockets from ?
My intention is to build simple-ish external module which includes the 8K static ram Mapped to 8-16K,
Regards Andy
Re. MMC interface.
To Clarify a few things if you please.
1. I need 3 bits latched output + 1 bit input I/O capability on my ZX81 to work with MMC interface ?
2. The code can be assembled to work in the 8-16K region (assuming Ram is fitted?)
3. Could i ask where you sourced your MMC sockets from ?
My intention is to build simple-ish external module which includes the 8K static ram Mapped to 8-16K,
Regards Andy
what's that Smell.... smells like fresh flux and solder fumes...
Re: Can ZX81 load progs directly from MP3 player?
Correct.1. I need 3 bits latched output + 1 bit input I/O capability on my ZX81 to work with MMC interface ?
Out: Data, clock, chipselect [even if only one card]
In: Data
Correct.2. The code can be assembled to work in the 8-16K region (assuming Ram is fitted?)
That's where mine runs from at the moment. You only need to alter two routines to get it working with whatever hardware you have.
http://www.crownhill.co.uk. A couple of quid for the socket & 1.50 postage. Not bad.3. Could i ask where you sourced your MMC sockets from ?
If I may be so bold might I suggest having eeprom in there. I'm bored of losing the contents of my BB ram and having to reload the driverMy intention is to build simple-ish external module which includes the 8K static ram Mapped to 8-16K,
Keep me posted - this is one of my favourite subjects!
Re: Can ZX81 load progs directly from MP3 player?
Cool Thanks for that, i'll order a few bits from them.
I was wondering about putting an eprom in there too, maybe switchable so i can copy the code to main ram, then switch 8-16 to ram, and copy the code back again, wonder if i could arrage some kind of bootstrap so it would happen on power up ? Food for thought anyway.
Regards Andy
I was wondering about putting an eprom in there too, maybe switchable so i can copy the code to main ram, then switch 8-16 to ram, and copy the code back again, wonder if i could arrage some kind of bootstrap so it would happen on power up ? Food for thought anyway.
Regards Andy
what's that Smell.... smells like fresh flux and solder fumes...
Re: Can ZX81 load progs directly from MP3 player?
Maybe 4k rom & 4k ram..? 4k should be enough for anyone, right?!
If you've got a big rampack then the 4k ram could be used for code, and the data required can sit above 32k.
Switching in and out? naah. Switch on, load 3dmm.p, play, reset, load zxgal.p, play ..
If you've got a big rampack then the 4k ram could be used for code, and the data required can sit above 32k.
Switching in and out? naah. Switch on, load 3dmm.p, play, reset, load zxgal.p, play ..