It's never happens? (Hardware distraction)

Discussions about Sinclair ZX80 and ZX81 Hardware
User avatar
AN7805
Posts: 91
Joined: Fri Oct 16, 2020 4:17 am

It's never happens? (Hardware distraction)

Post by AN7805 »

Hi at all,

I ask to the ZX81 user is never happens for distraction, to insert the power jack, on the ear or the mic connector.
And sadly power up. On ear and mic connector is any type of DC block protection?

Thanks,

Matteo
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: It's never happens? (Hardware distraction)

Post by XavSnap »

Yes, surely the worst design mistake from Sinclair on the Zx81... (Spectrum?) !
Use same socket with ear/mic, and the 9v power supply…
:oops:

I've been wrong many times before.
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
User avatar
AN7805
Posts: 91
Joined: Fri Oct 16, 2020 4:17 am

Re: It's never happens? (Hardware distraction)

Post by AN7805 »

Thanks Xavsnap.

And this have damage your ZX81?
You have immidiately power off the brick?

Thanks.
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: It's never happens? (Hardware distraction)

Post by XavSnap »

I had to unplug it… no pictures !
No, the mistake seem to be … safe for the ULA ship.
C10 & C12 can isolate the ULA, but in the french display mod, the transistor TR3 can be toasted by the 9v voltage on the Mic socket.
MicMic_socket.JPG
Last edited by XavSnap on Mon Oct 19, 2020 6:42 am, edited 1 time in total.
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
User avatar
AN7805
Posts: 91
Joined: Fri Oct 16, 2020 4:17 am

Re: It's never happens? (Hardware distraction)

Post by AN7805 »

You have shot the ULA and the Z80?

Sorry again.
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: It's never happens? (Hardware distraction)

Post by XavSnap »

No, the jack return to the right place…
And the computer start properly.

But, in the real world, the Mic and the Ear jack was connect at any time, and the power socket was the only one to be feed !

No, the main problem is to invert the power supply polarity… it's a component firework… RAM, ULA, the regulator…
:evil:
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
User avatar
AN7805
Posts: 91
Joined: Fri Oct 16, 2020 4:17 am

Re: It's never happens? (Hardware distraction)

Post by AN7805 »

Thanks so much Xavier.

Yes if you have reverse polarity is a tragedy :x

Thanks,

Matteo
User avatar
1024MAK
Posts: 5101
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: It's never happens? (Hardware distraction)

Post by 1024MAK »

Inserting the 9V DC power plug into either the Ear or Mic sockets does no harm to the ZX81. The ULA is the other side of DC blocking capacitors, so is unaffected.

Looking at the schematic for the French version, I can’t see how transistor TR3 would be damaged.

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer later in the year.
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: It's never happens? (Hardware distraction)

Post by XavSnap »

At a second look, the R31 resistor isn't shunted.
It's safe on the Mic socket too on the french board.
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
User avatar
AN7805
Posts: 91
Joined: Fri Oct 16, 2020 4:17 am

Re: It's never happens? (Hardware distraction)

Post by AN7805 »

XavSnap wrote: Mon Oct 19, 2020 8:11 pm At a second look, the R31 resistor isn't shunted.
It's safe on the Mic socket too on the french board.
Xav a another info,
the Belgian ZX81 are the same for the French market?

Thanks,

Matteo
Post Reply