Hi guys, I have a ZX 81 with the MEMOPAK 32K., I noted that without the Memopak, when I press Break when I just type LOAD "" (without starting to load), I get the "D/0" error, which is OK, but when I do the same with the memopak plugged I don't get the error, but a space and the K, like I just wrote a space.
Is this normal?
Strange behavior when loading programs
- 1024MAK
- Posts: 5118
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: Strange behavior when loading programs
I don’t have any real hardware to hand (I’m not at home) but on an emulator that I do have access to, I get exactly the same. So I would say that it is normal.
Mark
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.