Logitek 8240.56.1 Expansion Board for ZX81?

Discussions about Sinclair ZX80 and ZX81 Hardware
Post Reply
User avatar
xelalex
Posts: 14
Joined: Thu May 19, 2022 8:34 pm
Contact:

Logitek 8240.56.1 Expansion Board for ZX81?

Post by xelalex »

Hi!

I have what appears to be a 64k RAM expansion for the ZX81, made by Logitek. I haven't been able to find any information on this particular board, and would love to make sure it's what I think it is before plugging it in. Is there anything known about this board? Is it actually for the ZX81? If so, in what way can the 64k be used? I assume not everything will be accessible or usable for running code. Also, is there anything known about the company? Based on the label "Computer Systeme", I guess it's German, Swiss, or Austrian.

Image

Image

Kind regards,
Alex
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: Logitek 8240.56.1 Expansion Board for ZX81?

Post by XavSnap »

HI,

May be an English/US Kit, like Maplin... (Ci mounted on supports)

But, the red points "<>" on the PCB seem to be a Home-made PCB building.

"8240.56.1" =? Year:82 Week:40 #56 release:1

Ever seen "SYSTEME" for US computers.
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
User avatar
1024MAK
Posts: 5103
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: Logitek 8240.56.1 Expansion Board for ZX81?

Post by 1024MAK »

It’s a professionally made PCB, as it has plated through holes and the copper tracks have a HASL (hot air solder levelling). Although the slot on the rear edge connector definitely looks hand made…. :lol:

It indeed has 64k bytes of RAM. It does not have any bank switching, so most likely maps it’s RAM to 0x2000 (8192) to 0xFFFF (65535) leaving the ROM between 0x0000 and 0x1FFF (8191). That’s 56k bytes available.

It also has a counter for it’s refresh circuitry, so is almost certainly designed for a ZX81 or TS1000.

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer later in the year.
User avatar
siggi
Posts: 988
Joined: Thu May 08, 2008 9:30 am
Location: Wetterau, Germany
Contact:

Re: Logitek 8240.56.1 Expansion Board for ZX81?

Post by siggi »

Google found: "Full text of "c't (Magazin fuer Computertechnik) 12/1983""

https://archive.org/stream/ct8312/ct8312_djvu.txt

Code: Select all

Zubehör von Logitek 


Druckerinterface für ZX-Spectrum 

LPRINT, LUST, COPY läuft nun auch mit EPSON und Seikosha 
Druckern MX-80, GP-80 usw. Druck ohne Zeitverlust wie bei 
Druckerpuffern ist in Verbindung mit unserem 80 K RAM mög- 
lich. Der deutsche Zeichensatz kann geladen werden. 


Komplett mit Druckerkabel DM 275,— 

Formschönes schwarz eloxiertes Alugehäuse nimmt den Spec- 
trum mit Netzteil auf. Mit Eln/Ausschalter DM 119,— 

Gehäuse wie oben jedoch zusätzlich mit Erweiterungsplatine 

für 5 Karten DM 198,— 

Erweiterungsplatine für 5 Karten DM 98,— 

80 K Speichernachrüstsatz 

ermöglicht eine Vielzahl neuer Anwendungen durch mehr Spei- 
cherplatz DM 198,— 

ZX-81 64 K RAM Modul 

schwarz eloxiertes Alugehäuse, flach an den Sinclair ansteck- 
bar, Port wird durchgeführt DM 198,— 


ZX-81-Stecker DM 10,— Steckergegenstück DM 5,— 

ZX Spectrum 

Stecker DM 12,— Steckergegenstück DM 6,— 

Für unsere Programmkassetten Liste anfordern. 

Deutsche Beschreibung wird mitgeliefert 

Preise incl. MwSt. Vers, per Nachn. zzgl. 6,50 OM Porto u. Verpackung ab Lager Berlin 

• Achtung! Neuheiten! Messeverkauf • 

Besuchen Sie uns bei der Hobbytronic auf dem Stand 
der Fa. Dahms am 26.— 30. Oktober ln Stuttgart. 

Siggi
My ZX81 web-server: online since 2007, running since dec. 2020 using ZeddyNet hardware
http://zx81.ddns.net/ZxTeaM
User avatar
xelalex
Posts: 14
Joined: Thu May 19, 2022 8:34 pm
Contact:

Re: Logitek 8240.56.1 Expansion Board for ZX81?

Post by xelalex »

Nice find! So this was a Berlin based company, and I lived for almost ten years not far from that address :-)
User avatar
xelalex
Posts: 14
Joined: Thu May 19, 2022 8:34 pm
Contact:

Re: Logitek 8240.56.1 Expansion Board for ZX81?

Post by xelalex »

I finally got around to testing the Logitek 64k expansion. It seems to be fully working :) Apparently 48k available, no himem exec.
Attachments
logitek-64k-sysinfo.jpg
logitek-64k.jpg
David G
Posts: 387
Joined: Thu Jul 17, 2014 7:58 am
Location: 21 North, 156 West

Re: Logitek 8240.56.1 Expansion Board for ZX81?

Post by David G »

Nice! Back in 1983 I didn't even dream of having that much memory. But in 1984 I got Memotech 32K which was also very fine

What is Himem-exec?
User avatar
mrtinb
Posts: 1906
Joined: Fri Nov 06, 2015 5:44 pm
Location: Denmark
Contact:

Re: Logitek 8240.56.1 Expansion Board for ZX81?

Post by mrtinb »

David G wrote: Sun May 29, 2022 1:36 pm What is Himem-exec?
On a ZX81 you can run machine code on the addresses from 0k - 32k.

0k - 8k has the ROM, so fortunately this code can run.

8k - 16k has RAM on a few systems. It can also be filled with an extra custom ROM. Machine code can run here as well.

16k - 32k here is where the 16k RAMpack is, and here you can run machine code.

Above 32k is designed to be used for the display file, and machine code here will not work (except a small subset of instructions). So if you have a 64k RAMpack, the upper 32k can only be used for data.

However there exists a hardware modification hack called M1NOT, which enable the area 32k - 48k to run machine code. This is what Xelalex refers to as Himem-exec.

Memory from 48k - 64k can never execute machine code.
Martin
https://zx.rtin.be
ZX81, Lambda 8300, Commodore 64, Mac G4 Cube
Post Reply