Hi all
Thought I would post a piccy of My expand case.
drilled a couple of 3mm holes, spaced as req,bit of blue tac between the leds for light seperation, then the insulator from an old modulator glued onto the front of the case acting as a diffuser for the leds. Left lights up a nice soft green the right one red, it works honest!
Regards Moggy
ZXpand case
ZXpand case
- Attachments
-
- SANY0070.zip
- (1.44 MiB) Downloaded 242 times
Re: ZXpand case
Looks good !
Is that a 486 or chipset heatsink you have attached to your voltage regulator ?
Phill.
Is that a 486 or chipset heatsink you have attached to your voltage regulator ?
Phill.
Re: ZXpand case
Hi Phill Thanks for the compliment,Prime wrote:Looks good !
Is that a 486 or chipset heatsink you have attached to your voltage regulator ?
Phill.
486 it is Sir; I got the idea from a Guy on the German forum, ZXjens.
Though He has a fan on His, If You look to the right of My pic ( a bit dark I know)
I use a 12v case fan tapped off 9v keeps everything nice and cool.
Regards Moggy
A slightly better pic.
- Attachments
-
- SANY0070ab.zip
- (1.34 MiB) Downloaded 194 times