Page 1 of 2
ZXpand enclosures available
Posted: Wed Jan 25, 2017 5:24 pm
by mhudson52
I still have 3d-printed enclosures for sirmorris' ZXpand board available on SMR. Now that I have one of his AY boards (thanks, Charlie) the enclosure that will accommodate them both will coming very soon.
Re: ZXpand enclosures available
Posted: Thu Jan 26, 2017 3:28 am
by dasteph
Hi mhudson52, I went to grab the one other day, but it tells me that "Seller does not ship to your region".
Re: ZXpand enclosures available
Posted: Thu Jan 26, 2017 3:34 pm
by nollkolltroll
Perfect, I was wondering about an AY-enabled version. Waiting...
Re: ZXpand enclosures available
Posted: Thu Jan 26, 2017 5:22 pm
by schombi
I´d also need one for the AY version.
Re: ZXpand enclosures available
Posted: Thu Jan 26, 2017 5:42 pm
by Moggy
Ditto.
Re: ZXpand enclosures available
Posted: Tue Jan 31, 2017 1:56 am
by mhudson52
Good news guys! Thanks to Charlie I have finalized the design of the ZXpand+AY enclosure and it is being printed at this moment. I plan to go ahead and print several and get them listed on SMR as soon as possible. Since it is larger and takes longer to print (and a little more material as well) I will be listing them at $20 US. Shipping should stay the same as before.
Re: ZXpand enclosures available
Posted: Tue Jan 31, 2017 6:27 am
by schombi
Good news! Thanks a lot.
Re: ZXpand enclosures available
Posted: Thu Feb 02, 2017 3:27 am
by mhudson52
Hey guys, the ZXpand+AY enclosure is now up on the SMR web site. Note that this is for the AY that was shipped with the longer connection pin strips. There is a photo of this pin in the picture gallery of the long pin strip, so you'll need to look at yours to see which type you have.
I am in the process of producing enclosures for the "short pin" design which will will be listed in a couple of days.
Re: ZXpand enclosures available
Posted: Thu Feb 02, 2017 5:59 am
by schombi
Great! Just ordered one
Re: ZXpand enclosures available
Posted: Thu Feb 02, 2017 1:59 pm
by mhudson52
Schombi, so you have the "long pin" connector strips? Just want to make sure sure I explained the differences clearly enough so everyone gets the version they need.
