http://www.user.dccnet.com/wrigter/inde ... XKBDv3.htm
This is going to be my next hardware project. I've got the chips coming and a donor BBC micro keyboard that will be dremelled any time now I'm going to miss out the IO port but keep the joystick connector.
Edge connector sockets are hard though.. the Sinclair Shop has some but I often order from Farnell and Rapid. I'd like to be able to get some with my next order - just to save on postage, I've absolutely nothing against TSS - but I can't seem to track any down. Does anyone have a manufacturer name or even article number?
Thanks
Charlie
Edge connector manufacturer?
Re: Edge connector manufacturer?
Why bother...
Chop down an old 8-bit ISA motherboard, or buy a spectrum joystick interface off ebay...
Mike
Chop down an old 8-bit ISA motherboard, or buy a spectrum joystick interface off ebay...
Mike
Re: Edge connector manufacturer?
Hi that sounds perfet to me !!!sirmorris wrote:http://www.user.dccnet.com/wrigter/inde ... XKBDv3.htm
This is going to be my next hardware project. I've got the chips coming and a donor BBC micro keyboard that will be dremelled any time now I'm going to miss out the IO port but keep the joystick connector.
Edge connector sockets are hard though.. the Sinclair Shop has some but I often order from Farnell and Rapid. I'd like to be able to get some with my next order - just to save on postage, I've absolutely nothing against TSS - but I can't seem to track any down. Does anyone have a manufacturer name or even article number?
Thanks
Charlie
Can you "simplify" the circuit in order to leave just the Joystick stuff ??? can anybody do some 2 joysticks version ?
I mean just the joystick interface, nothing more... and of course it will be greater if we can have the PCB drawing
Gus
Re: Edge connector manufacturer?
I thought about the isa board, but the solder tags aren't long enough to fit a through-connector without faffingMike wrote:Chop down an old 8-bit ISA motherboard, or buy a spectrum joystick interface off ebay...
Mike
As for the JS interfaces - I've considered that. It usually ends up as more expensive when you include postage