New Adventure Game - The Crystal Frog
Re: New Adventure Game - The Crystal Frog
Hi Xav !
Very nice map !!!
Thanks you
I hope someone like to play the Adventure because programming it gives me a lot of work
Gus
Very nice map !!!
Thanks you
I hope someone like to play the Adventure because programming it gives me a lot of work
Gus
Re: New Adventure Game - The Crystal Frog
Hi all !
Yes, Very nice game !
I had to finish it ...
Yes, Very nice game !
I had to finish it ...
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
Re: New Adventure Game - The Crystal Frog
I'm having trouble playing this on the real hardware (done the pokes etc...) - I have a Memotech 16K pack with a Sinclair RAM Pack in the back of that.
Any tips?
Edit: I should point out that both RAM Packs work fine by themselves as they can both handle the game Virus
Regards,
Shaun.
Any tips?
Edit: I should point out that both RAM Packs work fine by themselves as they can both handle the game Virus
Regards,
Shaun.
Re: New Adventure Game - The Crystal Frog
Hi Gus !!!
Coooool.... Don't be nervous!
You ram-pack is ok ...
But, your computer is ouf of memory !
It's a 32 kbyte ram game.
I tryed to compress it, but it's bigger than 24kb.
You had to get a 48k ram Memotech pack.
And poke the new ram-top to reinit your new memory.
16kb is too tinny to load the game...
Gus... , I'm behind the door locked by a 4 digit code...
Who to get codes "LIFT PORTRAIT" and ???? ...
Coooool.... Don't be nervous!
Hi Shaun_B,I'm having trouble playing this on the real hardware (done the pokes etc...) - I have a Memotech 16K pack with a Sinclair RAM Pack in the back of that.
Any tips?
You ram-pack is ok ...
But, your computer is ouf of memory !
It's a 32 kbyte ram game.
I tryed to compress it, but it's bigger than 24kb.
You had to get a 48k ram Memotech pack.
And poke the new ram-top to reinit your new memory.
16kb is too tinny to load the game...
Gus... , I'm behind the door locked by a 4 digit code...
Who to get codes "LIFT PORTRAIT" and ???? ...
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
Re: New Adventure Game - The Crystal Frog
I'm aware that the game requires 32K - that's why I have a 16K Memotech RAM Pack connected to my ZX81 and a Sinclair RAM Pack connected to that, which should make 32K? I also have a 32K RAM Pack that doesn't work, or at least I can't get it to work.
Regards,
Shaun.
Regards,
Shaun.
Re: New Adventure Game - The Crystal Frog
I think both RAM packs are "sharing" memory map, so you are not "adding" 16+16... You have only 16K...Shaun_B wrote:I'm aware that the game requires 32K - that's why I have a 16K Memotech RAM Pack connected to my ZX81 and a Sinclair RAM Pack connected to that, which should make 32K?
Re: New Adventure Game - The Crystal Frog
Setting the Memotech Rampack appropriately will give you 32kb as can be seen in the manual:I think both RAM packs are "sharing" memory map, so you are not "adding" 16+16... You have only 16K...
http://www.zx81.de/memotech/memory16.txt
1 x ZX81, 2 x TK85 , 1 TK82C, 1 TK95, 1 x Alphacom 32 printer, 1 x ZXpand
ZeXtender board, Joy81 - Programmable Joystick Controller, Turbo Sound 81
http://zx81.eu5.org
https://toddysoftware.itch.io/
ZeXtender board, Joy81 - Programmable Joystick Controller, Turbo Sound 81
http://zx81.eu5.org
https://toddysoftware.itch.io/
Re: New Adventure Game - The Crystal Frog
I have the Memotech pack set correctly, 2 and 3 on, 1 and 4 off. Maybe the Sinclair pack is a bit flaky because it only works with a certain power supply.
I have another 16K pack but this again will only work with one of my power packs (which I think is 700mAmp).
If only I can get the 32K pack to work
Regards,
Shaun.
I have another 16K pack but this again will only work with one of my power packs (which I think is 700mAmp).
If only I can get the 32K pack to work
Regards,
Shaun.
Re: New Adventure Game - The Crystal Frog
I'm afraid I'm having trouble too.
I've tried it as a fastload, standard load (!) and loading from SD card. I've tried 2 different 32k ram expansions with the same result
This is typically what I see:
http://www.youtube.com/watch?v=71ThLLovMws
*edit*
My expansions are mapped from 8..40k - the binary is 32k - I think this may be the problem
Any chance there's an 8k data block that can be relocated?? Perhaps you could have a 2-part loader - part 1 copies data to 8k then load""s the second part ???
/me wishes hard
I've tried it as a fastload, standard load (!) and loading from SD card. I've tried 2 different 32k ram expansions with the same result
This is typically what I see:
http://www.youtube.com/watch?v=71ThLLovMws
*edit*
My expansions are mapped from 8..40k - the binary is 32k - I think this may be the problem
Any chance there's an 8k data block that can be relocated?? Perhaps you could have a 2-part loader - part 1 copies data to 8k then load""s the second part ???
/me wishes hard
Re: New Adventure Game - The Crystal Frog
Hi,
Sad New !
- It may be the "P" file... The original one seem to have 2 display memory in.
- There are a bug while the D_file is beatween 32k and 33k ! (due to the /M1)
We had to create a black rem filled with garbage to rise this display memory.
/or/ diet the rem, to lower the D_file segment...
- load the text part in the 2000h to 4000h, but fast-load can't be used !
Have More fun ?
Sad New !
- It may be the "P" file... The original one seem to have 2 display memory in.
- There are a bug while the D_file is beatween 32k and 33k ! (due to the /M1)
We had to create a black rem filled with garbage to rise this display memory.
/or/ diet the rem, to lower the D_file segment...
- load the text part in the 2000h to 4000h, but fast-load can't be used !
Have More fun ?
Xavier ...on the Facebook groupe : "Zx81 France"(fr)