Color Name Type Description
Black GND GND Device ground supply pin.
Brown CTS# Input Clear to Send Control input / Handshake signal.
Red VCC Output +5V output
Orange TXD Output Transmit Asynchronous Data output.
Yellow RXD Input Receive Asynchronous Data input.
Green RTS# Output Request To Send Control Output / Handshake signal.
(EDITED in CODE window)
I'm hoping I can use the new SERIAL command and baudrate to use HyperTerminal or something to communicate to the ZX81/TS100 and also the Parallax Serial LCD I will connect to the IDC connector on the ZXPand+
Interesting test. My ZXPand+ should arrive any day now.
Tim
Last edited by tdg8934 on Thu Aug 03, 2017 9:58 pm, edited 11 times in total.
Tim, the forum software makes a mess of tables, so put your tables in a "code" box (the </> icon above the edit box) like so...
Note you do still have to play with the spaces a bit...
This should be the connections:
Color Name Type Description
Black GND GND Device ground supply pin.
Brown CTS# Input Clear to Send Control input / Handshake signal.
Red VCC Output +5V output
Orange TXD Output Transmit Asynchronous Data output.
Yellow RXD Input Receive Asynchronous Data input.
Green RTS# Output Request To Send Control Output / Handshake signal.
I'm hoping I can use the new SERIAL command and baudrate to use HyperTerminal or something to communicate to the ZX81/TS100 and also the Parallax Serial LCD I will connect to the IDC connector on the ZXPand+
Interesting test. My ZXPand+ should arrive any day now.
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
Perfect. That's a FTDI USBSerialTTL that is. I have a couple. Great kit. It's the same pinout as my 'super serial' board that is on GitHub if you care to peruse