http://www.zx81stuff.org.uk/zx81/tape/G ... sAndGloops.
Keeping the three files in the same folder load and run GALIXREM.P which will load and set the UDG's then it will load the main program which isn't self running so just run and follow on screen instructions for speed, fire rate and swoop rate.
(in the absence of any instructions that came with the file I deduce a number between 1-9 is required for each)
another one for external keyboards I think as it's damn fast especially for a klutz like me!
UDG board owners please set to 128 and for Eighty one users make sure CHR$16 is set and ZXpand mode on.
The REM loader works for both emulator and real zeddy (thanks Andy for putting me right on that one)
- (4.52 KiB) Downloaded 240 times
I don't know if this was the fix but ... I saved a config ini file from menu...also set to 16K... ill retest
I've tested this one with the following hardware:
UDG set to 128
ZXpand (the older one) with firmware 2.61
After loading GALIXREM.P und doing RUN the game doesn't start and I get back the message "C/10" on the screen.