GCHarder wrote: ↑Fri Jun 28, 2019 9:13 pm
Horizontal coords are based on byte positions while vertical coords are based on pixel rows. The max horizontal pixel coord is 255.
Greg,
Attached a searchable version that includes an SHREB upgrade. I found no mention of upgrading in the manual, so could SEHR.P be upgraded to v3.00, that is fully functional (w/F-SAVE/64-column) . . .
THX!
b
Here it is with SHREB version 3. I haven't actually tried to figure out how the use the program, but the screen shot shows that SHREB version 3 is working.
GCHarder wrote: ↑Tue Jul 02, 2019 10:18 pm
Here it is with SHREB version 3. I haven't actually tried to figure out how the use the program, but the screen shot shows that SHREB version 3 is working.
Regards;
Greg
Greg,
Please let us know when you figure out how to use Tom's SE, but 1st,
splash screen gets generated, then HANGs w/key press.
Very finicky!
b
* ZERO STOP, no error get's trapped *
GCHarder wrote: ↑Tue Jul 02, 2019 10:18 pm
Here it is with SHREB version 3. I haven't actually tried to figure out how the use the program, but the screen shot shows that SHREB version 3 is working.
Regards;
Greg
Greg,
It appears that the P file format is very unstable when the file exceeds 16K. Here is an example where EO can generate only a valid wav file. Either a P or TZX format of the same program freezes. To launch this SHREB file, GOTO 200, then hit '9' and wait to see graphic.
b
GCHarder wrote: ↑Tue Jul 02, 2019 10:18 pm
Here it is with SHREB version 3. I haven't actually tried to figure out how the use the program, but the screen shot shows that SHREB version 3 is working.
Regards;
Greg
Greg,
The SHREB version 3 appears to handle Tom's SE graphics, but not regular text. If you know the subtlety between 2 and 3, please enlighten
b
This is a problem with ZXPand not the program. When generating standard ZX81 type characters SHREB expects to find the character patterns at $1E00, which are are no longer there because of the ZXPand overlay ROM. Pseudo-hi-res programs also have a similar problem.
GCHarder wrote: ↑Mon Jul 08, 2019 10:13 pm
This is a problem with ZXPand not the program. When generating standard ZX81 type characters SHREB expects to find the character patterns at $1E00, which are are no longer there because of the ZXPand overlay ROM. Pseudo-hi-res programs also have a similar problem.
Try loading the program with the /x option.
Regards;
Greg
Greg,
That was the trick, thx
b
* going on Holiday *