- Posts: 3130
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
there are two connectors at the first interface which is fixed on the zx81 . A connector for the floppy disk and a connector for a printer (type Seikosha gp50 or gp100)
I have two Mageco systems ... the second system has a small switch on the interface that is fixed on the zx81 . this allows to switch to a different menu.
this menu is different from the first version of the mageco system ...
I will try to make screenshots of the menus I have using the first version of mageco ...
kai, you had to forget something ... it was you who installed the floppy disk 3.5 inches .. because when my floppy disk was down, the floppy disk was a 3 inches .... you had changed the floppy disk to put a 3.5 inch .. I do not know if you remember that
excuse me for my english
bye bye kai .. best regards
I don't remember all the details after the years. It should work with 5.25" drives too.
As I know there was the Menu2 item so the ROM is 3.0.
Did the Mageco manual ever get translated to English?
try google translate...using an OCR.
Eagle project can be imported in Kicad, but i don't try it.I don't have Eagle
I downloaded the free version of Eagle and created the Gerbers. I have the files uploaded to OSH park.
Are the PCB layouts verified working? If so I can share the OSHpark links. For each design it costs just over 64$ for 3 boards.
ZX81, Lambda 8300, Commodore 64, Mac G4 Cube