How to Build a keystick port internally to zx81

Any discussions related to the creation of new hardware or software for the ZX80 or ZX81
Post Reply
User avatar
RS232
Posts: 42
Joined: Fri Apr 05, 2019 8:57 pm

How to Build a keystick port internally to zx81

Post by RS232 »

Was just thinking about squeezing a joystick pork inside a zx81. Taping the 5 6 7 8 and 0 keys should be possible with some careful soldering to the keyboard membrane sockets on the board. Tried it yet anyone?
I thing the tophalf of the membrane leads to one socket the bottom half to the other..

User avatar
siggi
Posts: 910
Joined: Thu May 08, 2008 9:30 am
Location: Dauernheim, Germany
Contact:

Re: How to Build a keystick port internally to zx81

Post by siggi »

Connecting a joystick directly to the keyboard lines will overload the Z80 addressbus (driving the keyboard lines), because the capacitive load of the long cable to the external joystick is too high.
At least some additional components (transistors or driver ICs) are necessary to drive this long cable.

HTH Siggi
My ZX81 web-server: online since 2007
http://zx81-siggi.endoftheinternet.org/index.html

User avatar
mrtinb
Posts: 1199
Joined: Fri Nov 06, 2015 5:44 pm
Location: Denmark
Contact:

Re: How to Build a keystick port internally to zx81

Post by mrtinb »

Or you could get a JoyKey from the German forum.

This needs an external keyboard buffer like Wilf Rigter’s BKBv3 or German team’s keyboard pcb.

http://forum.tlienhard.com/phpBB3/viewt ... f=2&t=2776

http://www.user.dccnet.com/wrigter/inde ... XKBDv3.htm
Martin
ZX81, Lambda 8300, Commodore 64, Mac G4 Cube

User avatar
RS232
Posts: 42
Joined: Fri Apr 05, 2019 8:57 pm

Re: How to Build a keystick port internally to zx81

Post by RS232 »

Thanks for feedback appreciated

2late
Posts: 14
Joined: Fri Apr 26, 2019 12:00 pm

Re: How to Build a keystick port internally to zx81

Post by 2late »

I once had such a thing with at least 1 meter of cable and a connector on the 81. I may have been quite naive, but it worked.

2late
Posts: 14
Joined: Fri Apr 26, 2019 12:00 pm

Re: How to Build a keystick port internally to zx81

Post by 2late »

I should have noted, that this used no commercial joystick, but microswitches connected to the lines for the cursor keys.

Post Reply